Analysis of Deep Drawing Process for Stainless Steel Micro-Channel Array
Open Access
Abstract
The stainless steel bipolar plate has received much attention due to the cost of graphite bipolar plates. Since the micro-channel of bipolar plates plays the role of fuel flow field, electric connector and fuel sealing, an investigation of the deep drawing process for stainless steel micro-channel arrays is reported in this work. The updated Lagrangian formulation, degenerated shell finite element analysis, and the r-minimum rule have been employed to study the relationship between punch load and stroke, distributions of stress and strain, thickness variations and depth variations of individual micro-channel sections. A micro-channel array is practically formed, with a width and depth of a single micro-channel of 0.75 mm and 0.5 mm, respectively. Fractures were usually observed in the fillet corner of the micro-channel bottom. According to the experimental results, more attention should be devoted to the fillet dimension design of punch and die. A larger die fillet can lead to better formability and a reduction of the punch load. In addition, the micro-channel thickness and the fillet radius have to be taken into consideration at the same time. Finally, the punch load estimated by the unmodified metal forming equation is higher than that of experiments.Keywords
Funding Information
- Ministry of Science and Technology in Taiwan (MOST 105-2221-E-167-007)
This publication has 22 references indexed in Scilit:
- Bipolar Plate Materials for Proton Exchange Membrane Fuel Cell ApplicationRecent Patents on Materials Science, 2015
- A graphite-coated carbon fiber epoxy composite bipolar plate for polymer electrolyte membrane fuel cellJournal of Power Sources, 2011
- Experimental fuel cell performance analysis under different operating conditions and bipolar plate designsInternational Journal of Hydrogen Energy, 2010
- Ex situ evaluation of nanometer range gold coating on stainless steel substrate for automotive polymer electrolyte membrane fuel cell bipolar plateJournal of Power Sources, 2010
- The electrical conductivity of a composite bipolar plate for fuel cell applicationsCarbon, 2009
- Investigation of Elastomer Graphite Composite Material for Proton Exchange Membrane Fuel Cell Bipolar PlateJournal of Fuel Cell Science and Technology, 2009
- Optimization design of slotted-interdigitated channel for stamped thin metal bipolar plate in proton exchange membrane fuel cellJournal of Power Sources, 2009
- Flow channel shape optimum design for hydroformed metal bipolar plate in PEM fuel cellJournal of Power Sources, 2008
- Fabrication of micro-channel arrays on thin metallic sheet using internal fluid pressure: Investigations on size effects and development of design guidelinesJournal of Power Sources, 2008
- Feasibility investigations on a novel micro-manufacturing process for fabrication of fuel cell bipolar plates: Internal pressure-assisted embossing of micro-channels with in-die mechanical bondingJournal of Power Sources, 2007