Microsphere-assisted, nanospot, non-destructive metrology for semiconductor devices
Authors:
Open Access
- 7 February 2022
- journal article
- research article
- Published by Springer Nature in Light: Science & Applications
- Vol. 11 (1) , 1-14
Abstract
As smaller structures are being increasingly adopted in the semiconductor industry, the performance of memory and logic devices is being continuously improved with innovative 3D integration schemes as well as shrinking and stacking strategies. Owing to the increasing complexity of the design architectures, optical metrology techniques including spectroscopic ellipsometry (SE) and reflectometry have been widely used for efficient process development and yield ramp-up due to the capability of 3D structure measurements. However, there has been an increasing demand for a significant reduction in the physical spot diameter used in the SE technique; the spot diameter should be at least 10 times smaller than the cell dimension (~30 × 40 μm2) of typical dynamic random-access memory to be able to measure in-cell critical dimension (CD) variations. To this end, this study demonstrates a novel spectrum measurement system that utilizes the microsphere-assisted super-resolution effect, achieving extremely small spot spectral metrology by reducing the spot diameter to ~210 nm, while maintaining a sufficiently high signal-to-noise ratio. In addition, a geometric model is introduced for the microsphere-based spectral metrology system that can calculate the virtual image plane magnification and depth of focus, providing the optimal distance between the objective lens, microsphere, and sample to achieve the best possible imaging quality. The proof of concept was fully verified through both simulations and experiments for various samples. Thus, owing to its ultra-small spot metrology capability, this technique has great potential for solving the current metrology challenge of monitoring in-cell CD variations in advanced logic and memory devices.Keywords
This publication has 47 references indexed in Scilit:
- Interferometric coherent Fourier scatterometry: a method for obtaining high sensitivity in the optical inverse-grating problemJournal of Optics, 2013
- Model-based SEM for dimensional metrology tasks in semiconductor and mask industryJournal of Physics D: Applied Physics, 2009
- Advances in AFM for the electrical characterization of semiconductorsReports on Progress in Physics, 2008
- STED microscopy with continuous wave beamsNature Methods, 2007
- Sub-diffraction-limit imaging by stochastic optical reconstruction microscopy (STORM)Nature Methods, 2006
- Optical characterization of two-dimensional photonic crystals based on spectroscopic ellipsometry with rigorous coupled-wave analysisMicroelectronic Engineering, 2006
- A survey on industrial vision systems, applications and toolsImage and Vision Computing, 2003
- Characterization of thin-film amorphous semiconductors using spectroscopic ellipsometryThin Solid Films, 2000
- Rigorous coupled-wave analysis of planar-grating diffractionJournal of the Optical Society of America, 1981
- An analytical model of SEM and STEM charge collection images of dislocations in thin semiconductor layers: I. Minority carrier generation, diffusion, and collectionPhysica Status Solidi (a), 1981