Driving forces in the corrosion dynamics of stainless steels in different aquatic environments
Author:
Open Access
- 23 March 2026
- journal article
- Published by IOP Publishing in Materials Research Express
- Vol. 13 (6) , 066501
Abstract
Corrosion is a critical factor in maintaining the integrity of marine facilities such as ship structures, offshore platforms, and other infrastructure, as it leads to surface deformation, including cracking and pitting. This research presents a comparative study of the effects of marine and other aquatic environments on AISI 304, AISI 304L, AISI 316L, and AISI 420 stainless steel (SS) metals. Tafel polarization tests were conducted to evaluate the breakdown potential of the passive film for these four SS types under different aquatic conditions. Corrosion resistance increased in the order AISI 420 < AISI 304 < AISI 304L < AISI 316L. The best-performing materials in all media were AISI 316L and AISI 304L, which exhibited the widest passive range, the lowest corrosion current density, and the highest polarization resistance. The results reveal that the breakdown potential is lower at higher salinity, indicating that increasing the ionic species and salt concentrations in seawater also increases corrosion attack on the metal surface. Based on the study’s outcomes, corrosion rates after 30 days ranged from 0.050 mm y −1 to 0.0245 mm y −1 . The I corr value of AISI 304L steel decreased significantly from 72.43 to 6.11 μA cm −2 after 30 days of exposure, While AISI 420 SS and AISI 304 were the most affected by corrosion in seawater.Keywords
This publication has 51 references indexed in Scilit:
- Spatial and seasonal variations and risk assessment for heavy metals in surface sediments of the largest river-embedded reservoir in ChinaEnvironmental Science and Pollution Research, 2020
- Effect of microstructure variation on the corrosion behavior of high-strength low-alloy steel in 3.5wt% NaCl solutionInternational Journal of Minerals, Metallurgy and Materials, 2015
- Influence of water salinity on corrosion risk—the case of the southern Baltic Sea coastEnvironmental Monitoring and Assessment, 2014
- Low energy SIMS characterization of passive oxide films formed on a low-nickel stainless steel in alkaline mediaApplied Surface Science, 2014
- Surface chemistry and corrosion behaviour of 304 stainless steel in simulated seawater containing inorganic sulphide and sulphate-reducing bacteriaCorrosion Science, 2013
- Weatherability of 09CuPCrNi steel in a tropical marine environmentCorrosion Science, 2009
- Effects of Microstructure on Corrosion of X70 Pipe Steel in an Alkaline SoilJournal of Materials Engineering and Performance, 2008
- Effect of seawater level on corrosion behavior of different alloysDesalination, 2008
- Factors Affecting Scale Formation in Sea Water Environments – An Experimental ApproachChemical Engineering & Technology, 2007
- The influence of pH and chloride concentration on the corrosion behaviour of AISI 316L steel in aqueous solutionsCorrosion Science, 1992