Blends of acrylonitrile–butadiene–styrene with an epoxy/cycloaliphatic amine resin: Phase‐separation behavior and morphologies
- 24 May 2002
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 85 (6) , 1277-1286
Abstract
The phase‐separation behavior and morphologies of a commercial epoxy resin based on diglycidyl ether of bisphenol A cured with the diamine hardener 1,3‐bisaminomethylcyclohexane and blended with different amounts of acrylonitrile–butadiene–styrene thermoplastic were studied with dynamic mechanical analysis and other techniques. In comparison with the neat system, the modified systems reached before gelation and vitrification, events that were assigned to the onset and endset of the storage modulus signals in a dynamic mechanical analysis curve (storage modulus versus time). These results were explained by a phase‐separation phenomenon induced by polymerization. Scanning electron microscopy and light transmission focused on phase separation revealed a sea‐island morphology for low thermoplastic contents, a bicontinuous structure for intermediate thermoplastic contents, and an epoxy‐nodular phase‐inverted structure for high thermoplastic contents. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1277–1286, 2002Keywords
Funding Information
- Comisión Interministerial de Ciencia y Tecnología (CICYT MAT97-0452)
- Xunta de Galicia (XUGA-17201B97)
This publication has 13 references indexed in Scilit:
- Isothermal curing by dynamic mechanical analysis of three epoxy resin systems: Gelation and vitrificationJournal of Applied Polymer Science, 2001
- Cure behavior of diglycidylether of bisphenol A/trimethylolpropane triglycidylether epoxy blends initiated by thermal latent catalystJournal of Polymer Science Part B: Polymer Physics, 2000
- Kinetic studies of the effect of ABS on the curing of an epoxy/cycloaliphatic amine resinJournal of Polymer Science Part B: Polymer Physics, 2000
- Blends of epoxy/anhydride thermosets with a high-molar-mass poly(methyl methacrylate)Polymer International, 1999
- Oligomeric and polymeric modifiers for toughening of epoxy resinsEuropean Polymer Journal, 1995
- Some effects of structure on the cure of glycidylether epoxy resinsPolymer, 1992
- Rubber-modified epoxies. III. Analysis of experimental trends through a phase separation modelJournal of Applied Polymer Science, 1991
- Toughening tetrafunctional epoxy resins using polyetherimidePolymer, 1989
- Elastomer-Modified Epoxy Resins in Coatings Applications1983
- Collision, co-ordination, diffusion and reaction velocity in condensed systemsTransactions of the Faraday Society, 1937