A Critical Review of Lithography Methodologies and Impacts of Topography on 2.5-D/3-D Interposers
- 7 April 2023
- journal article
- review article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 13 (3) , 291-299
Abstract
This paper analyzes the lithography design rules in package foundry and wafer foundry and reviews the major lithography techniques for package redistribution layer (RDL) fabrication for panel level 2.5D/3D interposers, fan-out packages and heterogeneous integration. The techniques surveyed in this paper are- contact aligners, projection aligners/steppers, laser direct writing (LDW) and laser ablation, capable of resolving routing line and space (L/S) of 0.8-1.5 μm with aspect ratio (AR) ≤ 5 and creating microvia with diameter of 1.5-2.0 μm at via pitch ≤5μm. The biggest challenge of advanced packaging is scaling the critical dimensions (CDs) on package to keep up with the pace of scaling of the bump pitch. In addition, there is a critical need for patterning fine lines-and-spaces with high aspect ratio to have low resistance traces. These high AR ultra-fine lines and ultra-fine pitch vias are crucial for meeting the needs of high-bandwidth die-to-die interconnections at high input/output (I/O) densities. All these challenges are mainly driven by lithography. With the development of advanced photoresists (PRs), the resolution factor K1 in projection lithography reduces from 0.66 to 0.39, improving the resolution by 40% without the negative impacts on the depth-of-focus (DOF). This paper also discusses the specific lithography challenges associated with topography of multi-layer RDL as well as their impacts on the fabrication of fine features. The fine pitch microvias can be a solution for scaling the I/O pitch down to 5-10 μm as a bumpless way to connect copper pads of known-good-dies to known-good- substrates in fan-out packages.Keywords
Funding Information
- Industry Consortium of 3-D Systems Packaging Research Center.
This publication has 18 references indexed in Scilit:
- Organic Damascene Process for 1.5- $\mu$ m Panel-Scale Redistribution Layer Technology Using 5- $\mu$ m-Thick Dry Film Photosensitive DielectricsIEEE Transactions on Components, Packaging and Manufacturing Technology, 2018
- Embedded Multi-die Interconnect Bridge (EMIB) -- A High Density, High Bandwidth Packaging Interconnect2016
- InFO (Wafer Level Integrated Fan-Out) Technology2016
- Lithography technology and trends for advanced packaging2016
- Development of new 2.5D package with novel integrated organic interposer substrate with ultra-fine wiring and high density bumps2014
- Flip-chip on glass (FCOG) package for low warpage2014
- Xilinx SSI technology concept to silicon development overview2012
- Low-Cost Thin Glass Interposers as a Superior Alternative to Silicon and Organic Interposers for Packaging of 3-D ICsIEEE Transactions on Components, Packaging and Manufacturing Technology, 2012
- Proximity Lithography in Sub-10 Micron Circuitry for Packaging SubstrateIEEE Transactions on Advanced Packaging, 2010
- Embedded Wafer Level Ball Grid Array (eWLB)2008