Evaluation of Residual Stress in MEMS Micromirror Die Surface Mounting Process and Shock Destructive Reliability Test
- 12 June 2023
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 23 (14) , 15461-15468
Abstract
Light Detection and Ranging (LiDAR) devices based on Micro-Electro-Mechanical Systems (MEMS) micromirrors have been promising sensors for automatic driving owing to the advantages of MEMS devices. The packaging plays a vital role in the reliability of MEMS micromirror but introduces the residual stress from the surface mounting process. The shock reliability of micromirrors is influenced by residual stress. In this work, the residual stress from the surface mounting process are investigated through resonant frequency tests. The frequency drift can be 718 Hz and -281 Hz under the residual stress of 107.0 MPa and -25.0 MPa respectively. As the difference of CTE rises, the residual stress proportionally increases but decreases with the thickness of the substrate. In addition, a higher curing temperature can introduce a more significant stress level. The dynamic response in shock environment under different residual stress are analyzed. Drop fall experiments verify the theoretical conclusions that the stiffness hardening effect can improve the shock level tolerance. The tensile stress levels of 41.7 MPa and 107.0 MPa are corresponding to 100 g and 200 g respectively. The influences of residual stress on frequency drift and reliability need to be considered seriously and simultaneously during the packaging design for MEMS micromirrors. This work provides a deep insight into commercial applications of MEMS-based LiDAR in autonomous driving.Keywords
Funding Information
- National Science Foundation for Major Program (12032015)
- National Key Research and Development Program of China (2021YFB3202200)
- State Key Laboratory of Mechanical System and Vibration (MSVZD202105)
- Double First-Class Construction Project of Shanghai Jiao Tong University (WH220402002)
This publication has 35 references indexed in Scilit:
- Thermal stress analysis of chip with pressure sensor embedded in accelerometer2017
- Thermal stress analysis of the low-k layer in a flip-chip packageMicroelectronic Engineering, 2016
- MEMS Laser Scanners: A ReviewJournal of Microelectromechanical Systems, 2014
- MEMS packaging and reliability: An undividable coupleMicroelectronics Reliability, 2012
- Influence of environmental temperature on the dynamic properties of a die attached MEMS deviceMicrosystem Technologies, 2009
- Multi-scale analysis of polysilicon MEMS sensors subject to accidental drops: Effect of packagingMicroelectronics Reliability, 2009
- Evaluation of Packaging Effect on MEMS Performance: Simulation and Experimental StudyIEEE Transactions on Advanced Packaging, 2007
- Evaluation of Die Stress in MEMS Packaging: Experimental and Theoretical ApproachesIEEE Transactions on Components and Packaging Technologies, 2006
- An effective method of determining the residual stress gradients in a micro-cantileverMicrosystem Technologies, 2005
- An Approximate Analysis of Stresses in Multilayered Elastic Thin FilmsJournal of Applied Mechanics, 1988