Mechanism of Intermediate Temperature Embrittlement of Ni and Ni-based Superalloys
Authors:
- 1 July 2012
- journal article
- research article
- Published by Taylor & Francis in Critical Reviews in Solid State and Materials Sciences
- Vol. 37 (3) , 181-214
Abstract
Ni-based superalloys play an important role in aircraft engine propulsion. However, many experiments demonstrated that these alloys as well as Ni always show ductility loss at intermediate temperature, which constrains further development. A comparison of published papers by various authors reveals considerable differences in understanding the mechanism of intermediate temperature embrittlement. To clarify this situation, the present article first confirms the generality of intermediate temperature embrittlement of Ni and Ni-based alloys by the experimental results reported in the literature. The existing interpretations of the mechanism are then outlined. Based on the generality, these interpretations are discussed through the representative investigations on intermediate temperature embrittlement. It is shown that the mechanism of intermediate temperature embrittlement has not been satisfactorily explained yet and “nonequilibrium interface segregation” of impurities taking into account the effect of strain rate may be the origin of intermediate temperature embrittlement of Ni and Ni-based superalloys. Future research directions aiming at the reason of abnormal fracture mode, the effect of the state of applied stress, the influence of strain rate, and the development of the theory nonequilibrium grain boundary segregation, are suggested to provide a complete understanding of intermediate temperature embrittlement.Keywords
This publication has 208 references indexed in Scilit:
- Microstructure development of different orientated nickel-base single crystal superalloy in directional solidificationMaterials Characterization, 2010
- Influence of heat treatment on microstructure and tensile properties of conventionally cast and directionally solidified superalloy CM247LCMaterials Letters, 2008
- Experimental study on the characteristic of grain-boundary segregation of phosphorus in Ni-base superalloyMaterials Letters, 2008
- Irradiation-induced impurity segregation and ductile-to-brittle transition temperature shift in high chromium ferritic/martensitic steelsJournal of Nuclear Materials, 2007
- Influence of thermal exposure on γ′ precipitation and tensile properties of DZ951 alloyMaterials Characterization, 2007
- Cyclic oxidation of Ru-containing single crystal superalloys at 1100°CMaterials Science and Engineering: A, 2007
- Microstructure and stress rupture properties of single crystal superalloy CMSX-2 under high thermal gradient directional solidificationMaterials Letters, 2007
- Effect of oxygen content of powder on microstructure and mechanical properties of hot isostatically pressed superalloy Inconel 718Materials Science and Engineering: A, 2006
- Stress-induced non-equilibrium grain boundary segregation of phosphorus in a Cr–Mo low alloy steelMaterials Science and Engineering: A, 2006
- Chemical composition measurements of a nickel-base superalloy by atom probe field ion microscopyMaterials Science and Engineering: A, 1995