Surface microarchitectural design in biomedical applications: Preparation of microporous polymer surfaces by an excimer laser ablation technique
Authors:
- 1 October 1995
- journal article
- research article
- Published by Wiley in Journal of Biomedical Materials Research
- Vol. 29 (10) , 1295-1301
Abstract
In this report we demonstrate a microprocessing method to prepare microporous polymer films by an excimer laser ablation technique, which may enable the fabrication of functional biomedical devices such as advanced artificial organs. The irradiation of a KrF excimer laser pulses (wavelength 248 nm; fluence 1 J/cm2 pulse) onto several polymer films was achieved by passing a laser pulse through an optical microscope, resulting in the formation of an etched pit on the irradiated surface due to ablative photodecomposition. The number of pulses and the micropositioning of the irradiation were precisely controlled by a computeraided control unit. Minimal ablation was observed for polyethylene with very small absorption coefficient (α) at 248 nm. For polymers which absorbed the laser photons, the etch depth increased linearly with number of pulses. The etch depth per pulse decreased with an increase in α values. An excellent structural quality, with micron‐order precision of an etched pit, was found for those polymers with larger α a values, such as polyimide, segmented polyurethane, and polycarbonate. © 1995 John Wiley & Sons, Inc.Keywords
This publication has 10 references indexed in Scilit:
- Surface fixation of poly(ethylene glycol)via photodimerization of cinnamate groupJournal of Polymer Science Part A: Polymer Chemistry, 1993
- Photo Induced Surface Heparin ImmobilizationASAIO Journal, 1993
- Ultraviolet laser ablation of organic polymersChemical Reviews, 1989
- Evolution of excimer laser corneal surgeryJournal of Cataract & Refractive Surgery, 1989
- An x‐ray photoelectron spectroscopy study of poly(methylmethacrylate) and poly(α‐methylstyrene) surfaces irradiated by excimer lasersJournal of Vacuum Science & Technology A, 1986
- Low temperature UV laser etching of PMMA: On the mechanism of ablative photodecomposition (APD)Journal of Polymer Science Part C: Polymer Letters, 1986
- Theory of etching of polymers by far-ultraviolet high-intensity pulsed laser- and long-term irradiationThe Journal of Physical Chemistry, 1984
- Far‐ultraviolet laser ablation of atherosclerotic lesionsLasers in Surgery and Medicine, 1984
- Ablative photodecomposition: action of far-ultraviolet (193 nm) laser radiation on poly(ethylene terephthalate) filmsJournal of the American Chemical Society, 1982
- Effective deep ultraviolet photoetching of polymethyl methacrylate by an excimer laserApplied Physics Letters, 1982