The Wear Behaviour of a New Eccentric Meshing Reducer with Small Teeth Difference
Open Access
Abstract
Eccentric meshing reducers are widely used in agriculture, industrial robots, and other fields due to their ability to achieve a high reduction ratio within a compact volume. However, the contact wear problem seriously affects the service performance of the eccentric meshing reducer, thereby limiting their range of applications. To effectively address this issue, this study involved a stress analysis of the contact pairs and a surface wear analysis of a new eccentric meshing reducer. The wear equation for the contact pairs was derived using Archard’s wear theory, incorporating geometric and material parameters from both the reducer gear contact pair and the spline contact pair. In parallel, a wear simulation was conducted by integrating the UMESHMOTION subprogram with ALE adaptive grids. Additionally, the effects of load amplitudes on contact pair stress and surface wear were systematically investigated. It is revealed that the contact pair stress of the reducer gear was higher than that of the spline contact pair. Furthermore, the internal spline exhibited the highest wear rate, followed by the output shaft gear, external spline, and input shaft gear, in that order. This work provides a comprehensive and in-depth understanding of the wear behaviors of general reducers with small teeth differences and offers valuable scientific references for design optimization, fault diagnosis, and maintenance strategy formulation.Keywords
Funding Information
- National Natural Science Foundation of China (92048201, CSTC2019ngzx0017, KJQN202103112, KJZD-K202203104, QKHJC-ZK [2023]YB263)
- Chongqing Science and Technology Bureau Agricultural High tech Special Project (92048201, CSTC2019ngzx0017, KJQN202103112, KJZD-K202203104, QKHJC-ZK [2023]YB263)
- Youth Project of Science and Technology Research Program of Chongqing Education Commission of China (92048201, CSTC2019ngzx0017, KJQN202103112, KJZD-K202203104, QKHJC-ZK [2023]YB263)
- Key Project of science and technology research program of chongqing education commission of china (92048201, CSTC2019ngzx0017, KJQN202103112, KJZD-K202203104, QKHJC-ZK [2023]YB263)
- Guizhou Provincial Basic Research Program (Natural Science) (92048201, CSTC2019ngzx0017, KJQN202103112, KJZD-K202203104, QKHJC-ZK [2023]YB263)
This publication has 32 references indexed in Scilit:
- Linear complementarity formulations for contact analysis and wear prediction in gearsMechanism and Machine Theory, 2024
- Dynamic Characteristic Analysis of the Shield Machine Three-Stage Planetary Reducer Considering Tooth WearJournal of Vibration Engineering & Technologies, 2023
- Wear analysis and simulation of small module gear based on Archard modelEngineering Failure Analysis, 2022
- Study on transmission error and torsional stiffness of RV reducer under wearJournal of Mechanical Science and Technology, 2022
- Mesh relationship modeling and dynamic characteristic analysis of external spur gears with gear wearFrontiers of Mechanical Engineering, 2022
- Fault mechanism and dynamic modeling of planetary gear with gear wearMechanism and Machine Theory, 2021
- A study of effects of tooth surface wear on time-varying mesh stiffness of external spur gear considering wear evolution processMechanism and Machine Theory, 2021
- Study on gear contact fatigue failure competition mechanism considering tooth wear evolutionTribology International, 2020
- Evaluating the influence of tooth surface wear on TVMS of planetary gear setMechanism and Machine Theory, 2019
- Study of rolling contact fatigue behavior of a wind turbine gear based on damage-coupled elastic-plastic modelInternational Journal of Mechanical Sciences, 2018