Numerical Investigation of the Defects Effect in Additive Manufactured Ti-6Al-4V Struts on Deformation Behavior Based on Microtomographic Images
Open Access
Abstract
This paper describes the influence of defects occurring in struts under tension, obtained using the additive method of laser powder bed fusion (LPBF), on the stress and strain distributions. The study used struts of different thicknesses separated from Ti-6Al-4V diamond lattice structures. For numerical modeling of stress and strain fields, models that reflect the realistic shape of the tested struts with their imperfections were used. The shape of the diamond structure struts was obtained based on microtomographic measurements. Based on the results obtained, the influence of defects in the material structure on the stress and strain distribution was analyzed. It was observed that the main factor influencing the stress and strain distribution in the struts are micronotches on their external surface. These imperfections have a significantly greater impact on the stress and strain concentration than the micropores inside. Furthermore, the interactions of the imperfections are also important, which in turn affects the stress distributions and the formation of bands of high-stress values inside the material. The relationship between the presence of micropores, the stress–strain curves, and the mechanical properties of the material was also assessed.Keywords
Funding Information
- Ministerstwo Edukacji i Nauki (UMO-2016/23/N/ST8/03519, 011/RID/2018/19)
- Ministry of Science and Higher Education (Poland) (UMO-2016/23/N/ST8/03519, 011/RID/2018/19)
This publication has 32 references indexed in Scilit:
- Elastic and failure response of imperfect three-dimensional metallic lattices: the role of geometric defects induced by Selective Laser MeltingJournal of the Mechanics and Physics of Solids, 2017
- Digital/virtual microstructures in application to metals engineering – A reviewArchives of Civil and Mechanical Engineering, 2017
- A new numerical modelling method for deformation behaviour of metallic porous materials using X-ray computed microtomographyMaterials Science and Engineering: A, 2017
- Improving the fatigue performance of porous metallic biomaterials produced by Selective Laser MeltingActa Biomaterialia, 2017
- Ductile fracture of EN-AW 2024 aluminum alloy specimens with notches under biaxial loading. Part 2 – Numerical research and ductile fracture criterionTheoretical and Applied Fracture Mechanics, 2016
- Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: A reviewBiomaterials, 2016
- Finite element modeling of anisotropic deformation behavior of the porous materials based on microtomographic imagesAIP Conference Proceedings, 2016
- Numerical modeling of the tensile deformation process of sintered 316L based on microtomography of porous mesostructuresMaterials & Design, 2015
- Modeling of the Tension and Compression Behavior of Sintered 316L Using Micro Computed TomographyActa Mechanica et Automatica, 2015
- Experimental Research into Fracture of EN-AW 2024 and EW-AW 2007 Aluminum Alloy Specimens with Notches Subjected to TensionExperimental Mechanics, 2010