Vibrational Power Flow and Its Application to a Passenger Car for Identification of Vibration Transmission Path
Authors:
- 30 April 2001
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
Reduction of structure-borne noise in the compartment of a car is an important task in automotive engineering. Transfer path analysis using the vibroacoustic reciprocity technique or multiple path decomposition method has generally been used for structure-borne noise path analysis. These methods are useful for solving a particular problem, but they do not quantify the effectiveness of vibration isolation of each isolator of a vehicle. To quantify the effectiveness of vibration isolation, vibrational power flow has been used for a simple isolation system or a laboratory-based isolation system. It is often difficult to apply the vibrational power flow technique to a complex isolation system like a car. In this paper, a simple equation is derived for calculation of the vibrational power flow of an isolation system with multiple isolators such as a car. It is successfully applied not only to quantifying the relative contributions of eighteen isolators, but also to reducing the structure-borne noise of a passenger car. According to the results, the main contributor of the eighteen isolators is the rear roll mount of an engine. The reduced structure-borne noise level is about 5dBA.Keywords
This publication has 8 references indexed in Scilit:
- TRANSIENT ENERGY FLOW BETWEEN TWO COUPLED BEAMSJournal of Sound and Vibration, 1996
- Weight Reduction and Noise Refinement of the Hyundai 1.5 Liter PowertrainSAE International Journal of Advances and Current Practices in Mobility, 1994
- Using Mechanical-Acoustic Reciprocity for Diagnosis of Structure Borne Sound in VehiclesSAE International Journal of Advances and Current Practices in Mobility, 1993
- Suspension Analysis in View of Road Noise OptimizationSAE International Journal of Advances and Current Practices in Mobility, 1993
- Vibrational power transmission to a seating of a vibration isolated motorJournal of Sound and Vibration, 1987
- On effective mobilities in the prediction of structure-borne sound transmission between a source structure and a receiving structure, part II: Procedures for the estimation of mobilitiesJournal of Sound and Vibration, 1982
- Power flow through machine isolators to resonant and non-resonant beamsJournal of Sound and Vibration, 1981
- Vibrational power flow from machines into built-up structures, part I: Introduction and approximate analyses of beam and plate-like foundationsJournal of Sound and Vibration, 1980