The Dual Mechanisms and Implementations of Stability Enhancement With Discrete Tip Injection in Axial Flow Compressors
- 7 October 2014
- journal article
- Published by Wiley in Journal of Turbomachinery
- Vol. 137 (3) , 031010
Abstract
The mechanisms and implementation scheme of discrete tip air injection are studied in this paper. A map that summarized the routes to stall is then proposed. It is argued that there exists a critical tip clearance ratio that separates two different routes to stall, which infers that the stability enhancement can also be based on two different mechanisms. A summation of tip injection test data in the literatures demonstrates that this is actually the case. For each compressor, there are two trends in the curve of stall margin improvement (SMI) versus injected momentum ratio, which is separated by a demarcation ratio of injected momentum. A series of tests are done in a low-speed compressor to show that the micro injection, wherein the injected momentum ratio is less than the demarcation ratio, can only act on the tip leakage flow (TLF) and thus provide small SMI by weakening the self-induced unsteadiness of the tip leakage flow (UTLF), while in contrast the macro injection can provide much larger SMI by acting on the main flow, decreasing the inlet angle-of-attack and thus unloading the blade tip. Based on these findings, a novel detecting-actuating scheme is designed and implemented onto a low-speed axial compressor. A cross-correlation coefficient is used to detect the UTLF in the prestall process way before stall inception and then to guide the opening of proportional electromagnetic valves. The injected flow rate can be smoothly varied to cover both micro- and macro-injection, which saves energy when the compressor is stable, and provides protection when it is needed. The same principle is applied to a high-speed compressor with a recirculation injection and the preliminary test results are very encouraging.Keywords
This publication has 9 references indexed in Scilit:
- A study of the unsteady tip flow field of a transonic compressorJournal of Thermal Science, 2011
- Flow Structure of Short-Length-Scale Disturbance in an Axial-Flow CompressorJournal of Propulsion and Power, 2008
- Criteria for Spike Initiated Rotating StallJournal of Turbomachinery, 2008
- Micro Air Injection and Its Unsteady Response in a Low-Speed Axial CompressorJournal of Turbomachinery, 2002
- Compressor Stability Enhancement Using Discrete Tip InjectionJournal of Turbomachinery, 2000
- Rotating Stall Control in a High-Speed Stage With Inlet Distortion: Part II—Circumferential DistortionJournal of Turbomachinery, 1999
- Rotating Stall Control in a High-Speed Stage With Inlet Distortion: Part I—Radial DistortionJournal of Turbomachinery, 1999
- Active Control of Rotating Stall in a Low-Speed Axial CompressorJournal of Turbomachinery, 1993
- Active suppression of compressor instabilities1986