W-band(90GHz) zero bias Schottky diode directive detector
Authors:
- 1 December 2015
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 2, 1-3
Abstract
Millimeter wave detector is an important part of the direct detection receiver[1]. In this paper, a W-band high performance detector circuit utilizing the commercially zero bias diode [2](ZBD) from Virginia Diodes, Inc(VDI) is proposed here. As the datasheet doesn't provide us enough information of the diode, at first we did the parameter extraction from the measured I_V curve to get the series resistance Rs, the reverse saturation current Is and ideality factor n. Secondly, using these parameters, we design the detector circuit model by Agilent ADS and Ansoft HFSS. The whole circuit is eventually manufactured on Rogers5880 (0.127mm) substrate. In addition, a self-made video amplifier is also used to help us evaluate the performance of the detector. The measurement data shows that the voltage sensitivity is above 1000mV/mW from 80GHz to 100GHz, especially in our needed work band 86~94GHz, the voltage sensitivity is up to 2000mV/mW, which lay a solid foundation for the realization of the direct detection receiver next work.Keywords
This publication has 4 references indexed in Scilit:
- W-Band Sb-Diode Detector MMICs for Passive Millimeter Wave ImagingIEEE Microwave and Wireless Components Letters, 2008
- Sb-Heterostructure Low Noise W-Band Detector Diode Sensitivity Measurements2006
- W-band MMIC direct detection receiver for passive imaging system2002
- Quantitative Comparison of Solid-State Microwave DetectorsIEEE Transactions on Microwave Theory and Techniques, 1966