Flow Characteristics in Volute of a Double-Suction Centrifugal Pump with Different Impeller Arrangements
Open Access
Abstract
As an important type of centrifugal pump, the double-suction pump has been widely used due to its high efficiency region and large flow rate. In the present study, the complex flow in volute of a double-suction centrifugal pump is investigated by numerical simulation using a re-normalization group (RNG) k-ε model with experimental validation. Axial flows are observed in volute near the impeller outlet and compared with four staggered angles. The net area-weighted average axial velocities decrease as the staggered angle increases. The axial flows are mainly caused by the different circumferential pressure distribution at the twin impeller outlet. The dominant frequencies of the axial velocities for different staggered angles are fBP and its harmonic. The pressure fluctuations in most regions of the volute are obtained by superimposing the pressure generated by the two impellers.Keywords
Funding Information
- the Tsinghua University Initiative Scientific Research Program (2015Z21034)
- National Natural Science Foundation of China (51809148, 51879140, 51741906)
- the Open Research Fund Program of State key Laboratory of Hydroscience and Engineering (sklhse-2018-E-01)
- the State Key Laboratory of Hydroscience and Engineering (2018-KY-02)
- the Key Laboratory of Fluid and Power Machinery (Xihua University), Ministry of Education (szjj-2017-100-1-004)
This publication has 29 references indexed in Scilit:
- Tip clearance on pressure fluctuation intensity and vortex characteristic of a mixed flow pump as turbine at pump modeRenewable Energy, 2018
- Controllable velocity moment and prediction model for inlet guide vanes of a centrifugal pumpEngineering Computations, 2018
- Influence of Geometry of Inlet Guide Vanes on Pressure Fluctuations of a Centrifugal PumpJournal of Fluids Engineering, 2018
- DETERMINATION OF AVERAGED AXISYMMETRIC FLOW SURFACES AND MERIDIAN STREAMLINES IN THE CENTRIFUGAL PUMP USING NUMERICAL SIMULATION RESULTSFacta Universitatis, Series: Mechanical Engineering, 2017
- Influence of T-shape tip clearance on performance of a mixed-flow pumpProceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2017
- Energy Performance and Flow Patterns of a Mixed-Flow Pump with Different Tip Clearance SizesEnergies, 2017
- Role of blade rotational angle on energy performance and pressure fluctuation of a mixed-flow pumpProceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2017
- Evaluation of Flow-Induced Dynamic Stress and Vibration of Volute Casing for a Large-Scale Double-Suction Centrifugal PumpMathematical Problems in Engineering, 2013
- Experimental Investigation of Time-Frequency Characteristics of Pressure Fluctuations in a Double-Suction Centrifugal PumpJournal of Fluids Engineering, 2011
- The Unsteady Pressure Field in a High Specific Speed Centrifugal Pump Impeller—Part I: Influence of the VoluteJournal of Fluids Engineering, 1999