Application of Taguchi method for the characterization of calcareous deposits formed by pulse cathodic protection
Authors:
- 9 October 2007
- journal article
- Published by Wiley in Materials and Corrosion
- Vol. 58 (9) , 710-715
Abstract
In this study, the Taguchi method, a powerful tool to design optimization for quality, is used to find the optimal process parameters of pulse cathodic protection system for the calcareous deposits' formation. An orthogonal array, main effect and the signal‐to‐noise (S/N) ratio are employed to investigate the process parameters in order to achieve optimum final current density. Through this study also the main process parameters that affect the calcareous deposits' formation can be found. Experiments were carried out to confirm the effectiveness of this approach. From the results, chronoamperometric measurements have been used to evaluate the influence of pulse cathodic protection on decreasing the required cathodic current for protection and also decreasing the surface coverage. The morphology of the formed deposits has been evaluated through scanning electron microscopy (SEM) and chemical analysis of the formed deposits has been performed using X‐ray diffraction (XRD). It is found that the different environmental conditions, i.e., Ca2+ concentration, Mg2+ concentration, rotation speed, and temperature significantly affect the final required current density of the pulse cathodic protection. The optimum levels of parameters at different frequencies are also presented.Keywords
This publication has 8 references indexed in Scilit:
- Improvement of corrosion protection properties of calcareous deposits on carbon steel by pulse cathodic protection in artificial sea waterAnti-Corrosion Methods and Materials, 2007
- Comparison of the tool life of tungsten carbides coated by multi-layer TiCN and TiAlCN for end mills using the Taguchi methodJournal of Materials Processing Technology, 2002
- Characterization of calcareous deposits in artificial sea water by impedances techniques: 2-deposit of Mg(OH)2 without CaCO3Electrochimica Acta, 2000
- Optimization of turning operations with multiple performance characteristicsJournal of Materials Processing Technology, 1999
- Laboratory and Field Characterization of a New Sacrificial Anode for Cathodic Protection of Offshore StructuresCorrosion, 1998
- Characterization of calcareous deposits in artificial sea water by impedance techniques—I. Deposit of CaCO3 without Mg(OH)2Electrochimica Acta, 1998
- Study of the corrosion protection properties of Al–Zn films synthesized by IBADJournal of Materials Processing Technology, 1998
- Influence of Cathodic Protection Parameters on Calcareous Deposit FormationCorrosion, 1988