A Rapid Detecting Method for Residual Flocculants in Water-Washed Manufactured Sand and Their Influences on Concrete Properties
Preprint
- 21 August 2025
- preprint
- Published by MDPI AG in Preprints.org
Abstract
With the increasing application of manufactured sand, as one of the uncertain factors affecting the properties and performance of ready-mixed concrete proportioning with commonly-used manufactured sand, residual flocculants in water-washed manufactured sand (WWMS) have received increased attention. Under certain prerequisites, a rapid detecting method for residual flocculants in WWMS was presented based on the pre-calibrated relationship between the Stormer viscosity of cement paste and the concentration of flocculants. Multi-dimensional and multi-factorial experiments were performed on cement paste, mortar and concrete orderly to explore the influences of flocculant content on the physical and mechanical properties of concrete. The results showed a good quantitative relationship between the Stormer viscosity and the flocculant content, and its mathematical formula depended on the type, molecular weight and content range of the flocculant. The residual flocculant contents in WWMS not only affected the workability of fresh concrete, but also the strength of hardened concrete to some extent.Keywords
All Related Versions
- Version 1, 2025-08-21, Preprints
- Published version: Construction Materials, 5 (4), 71.
This publication has 12 references indexed in Scilit:
- Effect of dry process manufactured sands dust on the mechanical property and durability of recycled concreteJournal of Building Engineering, 2024
- Preparation of recycled sand from WRSG and compressive and flexural behavior of recycled aggregate concreteConstruction and Building Materials, 2024
- Partial replacement of manufactured sand with homologous granite powder in mortar: The effect on porosity and capillary water absorptionConstruction and Building Materials, 2023
- Viscosity modifying agents: Key components of advanced cement-based materials with adapted rheologyCement and Concrete Research, 2022
- Effect of stone powder on the rheological and mechanical performance of cement-stabilized marine clay/sandConstruction and Building Materials, 2020
- Effect of granite dust on mechanical and some durability properties of manufactured sand concreteConstruction and Building Materials, 2016
- Experimental study on long-term compressive strength of concrete with manufactured sandConstruction and Building Materials, 2016
- Effect of polyacrylamide on rheology of fresh cement pastesCement and Concrete Research, 2015
- Rheological and mechanical properties of mortars prepared with natural and manufactured sandsCement and Concrete Research, 2008
- Comparison of natural and manufactured fine aggregates in cement mortarsCement and Concrete Research, 2007