High sensitivity temperature sensor based on Fresnel reflection with thermosensitive polymer: control of morphology and coating thickness
Authors:
Open Access
- 5 February 2020
- journal article
- conference paper
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 59 (SG) , SGGG06
Abstract
We propose and experimentally demonstrate a simple fabrication and high sensitivity Fabry–Perot interferometer polymer (FPIP)-coated temperature sensor based on Fresnel reflection. The single mode fiber end-face was coated with a polycarbonate (PC) or poly(methyl methacrylate) (PMMA) thermosensitive polymer. The experimental results indicate that the FPIP sensor coated with PMMA exhibits the average temperature sensitivities of 312.5 and 257.0 pm °C −1 for the thicknesses of 5.2 and 6.5 μ m, respectively, in the temperature range of 26 °C–80 °C. Meanwhile, the FPIP sensor coated with PC exhibits the average temperature sensitivities of 245.4 and 103.6 pm °C −1 for the thicknesses of 4.9 and 9.9 μ m, respectively, in the temperature range of 26 °C–140 °C. The FPIP sensor coated with PC indicates a relatively low sensitivity compared to PMMA coated sensor. However, the available operating temperature range for PC sensor is larger than PMMA.Keywords
This publication has 27 references indexed in Scilit:
- Temperature sensor utilizing a ternary photonic crystal with a polymer layer sandwiched between Si and SiO2 layersJournal of Theoretical and Applied Physics, 2018
- High sensitivity temperature sensor based on fiber air-microbubble Fabry-Perot interferometer with PDMS-filled hollow-core fiberSensors and Actuators A: Physical, 2018
- Demodulation method for tilted fiber Bragg grating refractometer with high sensitivityJournal of Applied Physics, 2018
- Spectrum ameliorative optical fiber temperature sensor based on hollow-core fiber and inner zinc oxide filmSensors and Actuators B: Chemical, 2017
- Hygroscopic polymer microcavity fiber Fizeau interferometer incorporating a fiber Bragg grating for simultaneously sensing humidity and temperatureSensors and Actuators B: Chemical, 2016
- A reflective optical fiber refractometer based on multimode interferenceSensors and Actuators B: Chemical, 2012
- Fresnel-reflection-based fiber sensor for on-line measurement of ambient temperatureOptics Communications, 2010
- Low-cost relative humidity sensor based on thermoplastic polyimide-coated fiber Bragg gratingSensors and Actuators B: Chemical, 2007
- Thermo-optic coefficients of polymers for optical waveguide applicationsPolymer, 2006
- Strain and temperature sensor using a combination of polymer and silica fibre Bragg gratingsOptics Communications, 2003