Investigation of Acoustic Emission of Cracks in Rails under Loading Close to Operational
Open Access
- 17 November 2022
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 12 (22) , 11670
Abstract
The paper is devoted to the study of the possibility of detecting cracks in railway rails by the acoustic emission (AE) method. An experimental study of AE signals under cyclic compression loading of rail fragments, which simulates the rail operating load, has been carried out. Fragments of rails without defects, as well as fragments containing pre-grown fatigue cracks, were studied. It was found that AE signals generated by a rail with a crack have higher activity compared to signals from defect-free specimens. It is shown that the AE signals during the loading of defect-free specimens have a short duration and low amplitude and may be caused by the deformation of non-metallic inclusions. The crack presence leads to an increase in the AE hits rate and changes the nature of the distribution of the AE hits amplitudes. It is shown that the crack location has no effect on the reliability of its detection by the AE method. Criteria of crack detection by AE testing are offered as a result of this study.Keywords
Funding Information
- Russian Foundation for Basic Research (20-38-51019)
- Sirius University of Science and Technology (20-38-51019)
- JSC Russian Railways (20-38-51019)
- Russian Foundation for Basic Research (20-38-51019)
This publication has 30 references indexed in Scilit:
- Acoustic emission detection of rail defect based on wavelet transform and Shannon entropyJournal of Sound and Vibration, 2015
- Acoustic emission monitoring of wheel sets on moving trainsConstruction and Building Materials, 2013
- Detection of crack growth in rail steel using acoustic emissionIronmaking & Steelmaking: Processes, Products and Applications, 2013
- A laboratory study of rail–wheel interaction monitoring using acoustic emission: Effect of rolling conditions with and without lateral rattlingProceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2012
- Correlation between features of acoustic emission signals and mechanical wear mechanismsWear, 2012
- Rail–wheel contact stress assessment using acoustic emission: a laboratory study of the effects of wheel flatsProceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2011
- Rail–wheel interaction monitoring using Acoustic Emission: A laboratory study of normal rolling signals with natural rail defectsMechanical Systems and Signal Processing, 2010
- An initial investigation on the potential applicability of Acoustic Emission to rail track fault detectionNDT & E International, 2004
- Detection of the onset of fatigue crack growth in rail steels using acoustic emissionEngineering Fracture Mechanics, 1994
- Anisotropic mechanical and acoustic emission behavior of A533B steelsMaterials Science and Engineering, 1981