Boron Concentration Gradient for Improved Thermal Reactor Performance of Boron-Stainless-Steel Control Rods
Authors:
- 1 October 1972
- journal article
- research article
- Published by Taylor & Francis in Nuclear Technology
- Vol. 16 (1) , 187-196
Abstract
An experimental plate-type neutron absorber assembly containing 10B dispersed in Type 200 austenitic stainless steel was irradiated in the active lattice of the 10 MW-SM-1 Reactor for 1.2 full power years. The 10B was distributed in a concentration gradient, increasing from 1 wt% in the surface layer to a maximum of 3 wt% 0.024 in. below the surface, to ensure a uniform burnup of 10B atoms in each volume increment through an exposure to thermal neutrons resulting in an average 10B burnup of 20 at.%. Postirradiation evaluation did not reveal any significant dimensional changes or structural damage to the dispersions at this burnup, which is a demonstration that the use of the boron concentration gradient results in at least a fourfold increase in the reactor performance capability of plate-type neutron absorbers containing dispersions of 10B in stainless steel.Keywords
This publication has 3 references indexed in Scilit:
- Stainless steel clad dispersion of boron in iron for pressurized water reactorsJournal of Nuclear Materials, 1959
- SPECIFICATIONS AND FABRICATION PROCEDURES ON EUROPIUM-BEARING ABSORBER RODS FOR REACTIVITY CONTROL IN CORE II OF SM-11959
- SPECIFICATIONS FOR ARMY PACKAGE POWER REACTOR (APPR-1) FUEL AND CONTROL ROD COMPONENTS1957