An analytical model for vibration and control of a PR-PRP parallel robot with flexible platform and prismatic joint
Authors:
- 2 April 2014
- journal article
- research article
- Published by SAGE Publications in Journal of Vibration and Control
- Vol. 22 (3) , 632-648
Abstract
An analytical solution for vibration of a parallel robot where its end-effector is flexible and has a passive prismatic joint(s) has not been presented before. In this research vibration analysis of a PR-PRP parallel robot using an analytical method is investigated. The PR-PRP parallel robot has two planar degrees of freedom and moves by means of two active prismatic joints. The robot moving platform is a flexible link with one passive revolute and one passive prismatic joint. First, the motion equation for a flexible link with the passive prismatic joint is developed. The motion equation is solved by employing an approximate analytical method called “constrained assumed modes method”. A time-variant constraint is written for the passive prismatic joint. The developed model allows for inclusion of the effect of physical length for the passive prismatic joint in contact with the moving platform on the vibration response of the system. For verification of the presented model and solution, three case studies are presented and results of the analytical solution are compared with results of a commercial finite element method software. For each case study, two different lengths for the passive prismatic joint are considered. Finally, active vibration control is performed for an applicable motion of the robot using the proportional-integral-derivative controller.Keywords
This publication has 42 references indexed in Scilit:
- A computationally efficient method for modeling flexible robots based on the assumed modes methodApplied Mathematics and Computation, 2011
- Dynamic analysis of flexible manipulators, a literature reviewMechanism and Machine Theory, 2006
- Dynamic finite-element analysis of a planar high-speed, high-precision parallel manipulator with flexible linksMechanism and Machine Theory, 2005
- Effect of prismatic joint inertia on dynamics of kinematic chainsMechanism and Machine Theory, 2004
- Selection of modal basis for flexible bodies of mechanical systemsMechanism and Machine Theory, 1995
- Translational Joints in Flexible Multi body DynamicsMechanics of Structures and Machines, 1990
- Large-Displacement Finite Element Analysis of Flexible LinkagesJournal of Mechanical Design, 1990
- Extrusion of a beam from a rotating baseJournal of Guidance, Control, and Dynamics, 1989
- A General Method for Kineto-Elastodynamic Analysis and Synthesis of MechanismsJournal of Engineering for Industry, 1972
- Elastic Link Mechanism DynamicsJournal of Engineering for Industry, 1971