Optimization Design and Performance Evaluation of R1234yf Ejectors for Ejector-Based Refrigeration Systems
Open Access
Abstract
With the increasingly serious energy and environmental problems, the R1234yf ejector refrigeration system (ERS) shows great development potential in the refrigeration industry due to its simplicity, low maintenance costs and environmentally friendly nature. However, poor ejector performance has always been the main bottleneck for system applications. In order to overcome this problem, this paper proposes a design method for R1234yf ejectors based on the gas dynamic method and optimizes the geometrical parameters including the area ratio (AR) and nozzle exit position (NXP) to improve its performance through the control variable optimization algorithms. Based on the validated simulation model, the results show that the entrainment ratio increases initially and then decreases with the increase in AR and NXP, respectively; the AR has a significant effect on the shock wave position in the mixing chamber and the NXP can directly influence the expansion state of motive fluid; the ejector performance increases by about 17% over the initial entrainment ratio by the control variable optimization algorithms. This work can guide the R1234yf ejector design and promote the development of the ERS with environmentally friendly working fluids.Keywords
Funding Information
- National Natural Science Foundation of China (61773240)
This publication has 34 references indexed in Scilit:
- Investigation of a novel ejector expansion refrigeration system using the working fluid R134a and its potential substitute R1234yfInternational Journal of Refrigeration, 2014
- Performance characteristics of R1234yf ejector-expansion refrigeration cycleApplied Energy, 2014
- Experimental investigation of a two-phase ejector cycle suitable for use with low-pressure refrigerants R134a and R1234yfInternational Journal of Refrigeration, 2014
- Theoretical evaluation on effect of internal heat exchanger in ejector expansion transcritical CO2 refrigeration cycleApplied Thermal Engineering, 2013
- Study of refrigeration system with HFO-1234yf as a working fluidInternational Journal of Refrigeration, 2012
- Multidimensional modeling of condensing two-phase ejector flowInternational Journal of Refrigeration, 2012
- A review of thermally activated cooling technologies for combined cooling, heating and power systemsProgress in Energy and Combustion Science, 2011
- Heat transfer and pressure drop during condensation of the low GWP refrigerant R1234yfInternational Journal of Refrigeration, 2010
- Shock circle model for ejector performance evaluationEnergy Conversion and Management, 2007
- A 1-D analysis of ejector performanceInternational Journal of Refrigeration, 1999