Tip-Clearance and Secondary Flows in a Transonic Compressor Rotor
Authors:
- 1 October 1999
- journal article
- Published by Wiley in Journal of Turbomachinery
- Vol. 121 (4) , 751-762
Abstract
The purpose of this paper is to investigate tip-clearance and secondary flows numerically in a transonic compressor rotor. The computational method used is based on the numerical integration of the Favre-Reynolds-averaged three-dimensional compressible Navier–Stokes equations, using the Launder–Sharma near-wall k–ε turbulence closure. In order to describe the flowfield through the tip and its interaction with the main flow accurately, a fine O-grid is used to discretize the tip-clearance gap. A patched O-grid is used to discretize locally the mixing-layer region created between the jetlike flow through the gap and the main flow. An H–O–H grid is used for the computation of the main flow. In order to substantiate the validity of the results, comparisons with experimental measurements are presented for the NASA_37 rotor near peak efficiency using three grids (of 106, 2 X 106, and 3 X 106 points, with 21, 31, and 41 radial stations within the gap, respectively). The Launder–Sharma k–ε model underestimates the hub corner stall present in this configuration. The computational results are then used to analyze the interblade-passage secondary flows, the flow within the tip-clearance gap, and the mixing downstream of the rotor. The computational results indicate the presence of an important leakage-interaction region where the leakage-vortex after crossing the passage shock-wave mixes with the pressure-side secondary flows. A second trailing-edge tip vortex is also clearly visible.Keywords
This publication has 39 references indexed in Scilit:
- The Effect of Tip Clearance on a Swept Transonic Compressor RotorJournal of Turbomachinery, 1996
- Experimental and Computational Investigation of the Tip Clearance Flow in a Transonic Axial Compressor RotorJournal of Turbomachinery, 1996
- An Approximate Analysis and Prediction Method for Tip Clearance Loss in Axial CompressorsJournal of Turbomachinery, 1994
- Viscous Analysis of Three-Dimensional Rotor Flow Using a Multigrid MethodJournal of Turbomachinery, 1994
- The 1993 IGTI Scholar Lecture: Loss Mechanisms in TurbomachinesJournal of Turbomachinery, 1993
- Investigation of Tip Clearance Phenomena in an Axial Compressor Cascade Using Euler and Navier–Stokes ProceduresJournal of Turbomachinery, 1993
- Three-Dimensional Navier–Stokes Computations of Transonic Fan Flow Using an Explicit Flow Solver and an Implicit κ–ε SolverJournal of Turbomachinery, 1993
- An Investigation of Turbulence Modeling in Transonic Fans Including a Novel Implementation of an Implicit k–ε Turbulence ModelJournal of Turbomachinery, 1993
- Three-Dimensional Flow Phenomena in a Transonic, High-Throughflow, Axial-Flow Compressor StageJournal of Turbomachinery, 1993
- The Role of Tip Clearance in High-Speed Fan StallJournal of Turbomachinery, 1993