Blending of NR/BR/EPDM by reactive processing for tire sidewall applications. II. Characterization
- 27 November 2006
- journal article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 103 (4) , 2547-2554
Abstract
Cure incompatibility in NR/BR/EPDM blends is a crucial problem, affecting blend properties. In a previous study, it was demonstrated that the mechanical properties of such blends can be significantly improved by utilizing a reactive processing technique, in which a pretreated EPDM is first prepared by incorporating all compounding ingredients in the EPDM and subsequent preheating, prior to crossblending with premasticated NR/BR. In the present article, the pretreated EPDM‐moieties are prepared using two different accelerators, N‐cyclohexyl‐2‐benzothiazole sulfenamide (CBS) and 6‐nitro MBTS. The latter was synthesized and applied for the purpose of IR characterization. The infrared (IR) spectra of the pretreated, extracted EPDM demonstrate absorption peaks associated with the IR absorption of the functional groups in the accelerator fragments, attached to the EPDM. NR/BR/EPDM (35/35/30) ternary blends are prepared by reactive mixing of the pretreated EPDM with CBS fragments attached with premasticated NR/BR on a two‐roll mill. Their blend morphological features are studied using the atomic force microscopy (AFM) and transmission electron microscopy (TEM) microscopic techniques, in comparison with those of blends prepared by a conventional straight mixing method. Both the tapping mode AFM phase images and TEM micrographs clearly show that reactive mixing leads to more homogeneous blends. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103:2547–2554, 2007Keywords
This publication has 11 references indexed in Scilit:
- Blending of NR/BR/EPDM by reactive processing for tire sidewall applications. I. Preparation, cure characteristics and mechanical propertiesJournal of Applied Polymer Science, 2006
- Activators in Accelerated Sulfur VulcanizationRubber Chemistry and Technology, 2004
- Atomic Force Microscopy in Analysis of Rubber MaterialsRubber Chemistry and Technology, 2003
- Characterization of Rubber Micro-Morphology by Atomic Force Microscopy(AFM)Rubber Chemistry and Technology, 2003
- Atomic Force Microscopy of Elastomers: Morphology, Distribution of Filler Particles, and Adhesion Using Chemically Modified TipsRubber Chemistry and Technology, 1999
- Force Modulation AFM of Elastomer Blends: Morphology, Fillers and Cross-linkingSurface and Interface Analysis, 1997
- Polymer Microscopy1996
- Morphological Investigations on Carbon-Black Particles by Atomic Force MicroscopyRubber Chemistry and Technology, 1994
- Temperature Effects on the Stability of Intermediates and Crosslinks in Sulfur VulcanizationRubber Chemistry and Technology, 1984
- Raman Spectral Studies of 2-Mercaptobenzothiazole Accelerator SystemsRubber Chemistry and Technology, 1974