The Effect of the Co−Blending Process on the Sensing Characteristics of Conductive Chloroprene Rubber/Natural Rubber Composites
Open Access
Abstract
Three different blending procedures were used to create multiwalled carbon nanotube (MWCNT)-modified chloroprene rubber (CR)/natural rubber (NR) blended composites (MWCNT/CR–NR). The effects of the blending process on the morphology of the conductive network and interfacial contacts were researched, as well as the resistance–strain response behavior of the composites and the mechanism of composite sensitivity change under different processes. The results show that MWCNT/CR–NR composites have a wide strain range (ε = 300%) and high dynamic resistance–strain response repeatability. Different blending procedures have different effects on the morphology of the conductive network and the interfacial interactions of the composites. If the blending procedures have wider conductive phase spacing and stronger interfacial contacts, the change in the conductive path and tunneling distance occurs more rapidly, and the material has a higher resistance–strain response sensitivity.Keywords
Funding Information
- National Natural Science Foundation of China (11962009)
This publication has 45 references indexed in Scilit:
- Selective localization of multi-walled carbon nanotubes in thermoplastic elastomer blends: An effective method for tunable resistivity–strain sensing behaviorComposites Science and Technology, 2014
- Effects of partial replacement of silicone rubber with flurorubber on properties of dynamically cured poly(vinylidene fluoride)/silicone rubber/flurorubber ternary blendsPolymer Testing, 2013
- Fabrication of Highly Stretchable Conductors via Morphological Control of Carbon Nanotube NetworkSmall, 2013
- Selective location and conductive network formation of multiwalled carbon nanotubes in polycarbonate/poly(vinylidene fluoride) blendsComposites Science and Technology, 2011
- Dispersion and functionalization of carbon nanotubes for polymer-based nanocomposites: A reviewComposites Part A: Applied Science and Manufacturing, 2010
- An innovative method to reduce percolation threshold of carbon black filled immiscible polymer blendsComposites Part A: Applied Science and Manufacturing, 2008
- Electrical conductivity recovery in carbon nanotube–polymer composites after transient shearPhysica Status Solidi (b), 2007
- Studies on conductivity of nitrile rubber and its blends with NR, EPDM, and PVCPlastics, Rubber and Composites: Macromolecular Engineering, 2002
- Advances in the science and technology of carbon nanotubes and their composites: a reviewComposites Science and Technology, 2001
- Generalized Formula for the Electric Tunnel Effect between Similar Electrodes Separated by a Thin Insulating FilmJournal of Applied Physics, 1963