Characterization of microstructural evolution with pre-strain in BG801 bearing steel: Grain, carbides, retained austenite and martensite
Authors:
- P.W. ZhouPZP.W. Zhou
- W.L. YangWYW.L. Yang
- Y.C. WuYWY.C. Wu
- Y.Y. ZongYZY.Y. Zong
Abstract
No abstract availableKeywords
Funding Information
- National Natural Science Foundation of China (51974099)
This publication has 44 references indexed in Scilit:
- The crystallography of M23C6carbides in a martensitic 9% Cr steel after tempering, aging and creepPhilosophical Magazine, 2013
- Steels for bearingsProgress in Materials Science, 2012
- Microstructure-sensitive modeling of rolling contact fatigueInternational Journal of Fatigue, 2010
- Crystallography and metallography of carbides in high alloy steelsMaterials Characterization, 2008
- Difference in recrystallization behavior between lath martensite and deformed ferrite in ultralow carbon steelScripta Materialia, 2005
- Geometrically necessary dislocations and strain-gradient plasticity: a few critical issuesScripta Materialia, 2003
- Amount of retained austenite at room temperature after reverse transformation of martensite to austenite in an Fe–13%Cr–7%Ni–3%Si martensitic stainless steelScripta Materialia, 2001
- Interdiffusion behaviour in aluminide-coated René 80H at 1150°CMaterials Science and Engineering: A, 1997
- Some effects of retained austenite on the fatigue resistance of carburized steelMetallurgical Transactions A, 1975
- III. Dislocation densities in some annealed and cold-worked metals from measurements on the X-ray debye-scherrer spectrumPhilosophical Magazine, 1956