The Induced Orientation of Hydroxypropyl Methylcellulose Coating for Ultralow Wear
Open Access
- 15 April 2024
- journal article
- research article
- Published by MDPI AG in Lubricants
- Vol. 12 (4) , 129
Abstract
This study investigated the frictional properties of HPMC under different load and concentration conditions through friction experiments and surface characterization. The study aimed to explore and reveal the influence of load and concentration on the frictional properties of HPMC, as well as its anti−wear mechanism. The results of the study indicated that under the same solution concentration, the effect of load on the friction coefficient of HPMC was not significant. Specifically, for samples with low concentration (C−0.2), the wear ratio of HPMC under a 4 N load (1.01 × 10−11 mm3·N−1·m−1) was significantly lower than the wear ratio under a 2 N load (1.71 × 10−10 mm3·N−1·m−1). The orientation−driven formation of graphite−like carbon nanosheets, initiated by the decomposition of HPMC short chains, created a tribofilm−containing organic−chain mixed nanosheet on the sliding contact surface, which prevented direct contact between the upper and lower friction pairs. This achieved the anti−wear mechanism of two−body wear (tribo−film of an mDLC−coated ball and tribo−film of a GLC−coated Si wafer), ultimately leading to a state of ultra−low wear at the interface. The excellent anti−wear performance of HPMC suggests its potential as a candidate for the next generation of environmentally friendly bio−based solid lubricants.Keywords
Funding Information
- National United Engineering Laboratory for Advanced Bearing Tribology (202401, JD2431, SKLTKF23B02, 52075284)
- Fundamental Research Funds for the Central Universities (202401, JD2431, SKLTKF23B02, 52075284)
- Tribology Science Fund of the State Key Laboratory of Tribology in Advanced Equipment (202401, JD2431, SKLTKF23B02, 52075284)
- National Natural Science Foundation of China (202401, JD2431, SKLTKF23B02, 52075284)
This publication has 28 references indexed in Scilit:
- Structural and environmental dependence of superlubricious properties in hydrogenated Graphite-Like carbon Films: Implications in solid state lubricationApplied Surface Science, 2023
- Low friction of superslippery and superlubricity: A reviewFriction, 2022
- Current international research into cellulose as a functional nanomaterial for advanced applicationsJournal of Materials Science, 2022
- Thermal extrusion of cellulose using hydroxypropyl methylcelluloseCellulose, 2022
- Review of the recent developments in all-cellulose nanocomposites: Properties and applicationsCarbohydrate Polymers, 2022
- Friction Reduction Mechanism of Aqueous Hydroxyethyl Cellulose Solution Enhanced by Synergistic Effect of APTESTribology Letters, 2021
- Deposition of diamond-like carbon coatings: Conventional to non-conventional approaches for emerging marketsCeramics International, 2021
- Superlubricity of carbon nanostructuresCarbon, 2020
- Nanomaterials in SuperlubricityAdvanced Functional Materials, 2019
- Raman study of HPMC biopolymer transfer layer formation under tribology testOptical and Quantum Electronics, 2016