Influence of Surface Nanocrystallization on Two-Step Pack-Boronizing of AISI 5120 Steel
Open Access
Abstract
AISI 5120 steel, which underwent 30 min single-surface nanocrystallization via supersonic fine particle bombarding (SFPB), was pre-boronized at 600 °C for 2 h, and then final-boronized at 800 °C or 900 °C for 2–6 h, i.e., two-step pack-boronizing. The specimens’ microstructure and mechanical characteristics before and after two-step boronizing were examined in detail. The results showed that the hardness of the SFPB surface reached 570 HV, which was 2.73 times higher than its original hardness (209 HV). The nanocrystallized surface exhibited the increased thickness and hardness of the boride layer, in comparison to that of the un-SFPB surface. Two-step pack-boronizing further improved the thickness and hardness of the SFPB surface of AISI 5120 steel. When final-boronizing at 900 °C for 6 h, the thickness and hardness of the boronizing layer in the SFPB surface was 88 µm and 2196 HV, respectively, which was 10.5 times higher than the original hardness. Additionally, the CeO2 added in the boronizing agent was helpful in obtaining the boride layer with the ductile-serrated Fe2B phase rather than the brittle phase of FeB in the boride layer, which was expected for industrial applications.Keywords
Funding Information
- National Natural Science Foundation of China (52171191, 2021KWZ-12, 2017M623084)
- International Science and Technology Cooperation Program of Shaanxi Key R&D Program (52171191, 2021KWZ-12, 2017M623084)
- China Postdoctoral Science Foundation (52171191, 2021KWZ-12, 2017M623084)
This publication has 18 references indexed in Scilit:
- Influence of the surface nanocrystallization on the gas nitriding of Ti–6Al–4V alloyApplied Surface Science, 2013
- Effect of surface mechanical attrition treatment (SMAT) on pack boronizing of AISI 304 stainless steelSurface and Coatings Technology, 2013
- Effect of surface mechanical attrition treatment (SMAT) on boronizing of EN8 steelSurface and Coatings Technology, 2012
- The growth of single Fe2B phase on low carbon steel via phase homogenization in electrochemical boriding (PHEB)Surface and Coatings Technology, 2011
- Accelerated kinetics of surface hardening by diffusion near phase transition temperature: Mechanism of growth of boride layers on titaniumActa Materialia, 2011
- Influence of process duration on structure and chemistry of borided low carbon steelSurface and Coatings Technology, 2010
- Influence of Micro-Addition Chromium on the Valence Electron Structure and Toughness of Fe2B PhaseApplied Mechanics and Materials, 2010
- Characterization of AISI 4140 borided steelsApplied Surface Science, 2010
- Some mechanical properties of borided AISI H13 and 304 steelsMaterials & Design (1980-2015), 2007
- The effect of thermocycling liquid boronizing on the thickness of the boride layer and the transition zoneScripta Metallurgica et Materialia, 1993