Manufacturing of Microfluidic Device Using 3D-Printing Method for Biomedical Applications
Authors:
Open Access
- 13 May 2025
- journal article
- research article
- Published by Springer Nature in Biomedical Materials & Devices
- Vol. 4 (2) , 2207-2212
Abstract
Microfluid Technology is one of the modern technologies that has been used in many engineering applications as well as biomedical, biology, and medical treatments. They have employed the special features of fluids in micro-scale and nano-litter, where the costs and time of test were important issues. A microfluid unit is a chip of silicon, glass, or elastomer that the tubes with micron-scale channels through which fluids run through these tubes. In this research, we have tried to introduce a new microchannel and a microfluidic system was produced by a 3-dimensional (3D) printer. Then, we compared in terms of important parameters of fabricating a microfluidic system using simple methods with other manufacturing microfluidic device method namely micro-milling. Our results showed that to choose the suitable method to fabricate the microfluidic devices, different parameters should be investigated, including time and cost of production, and number of samples. Therefore, Digital Light Processing (DLP) method could be suggested as the optimum method for manufacturing the microfluidic devices.Keywords
Funding Information
- University of the Witwatersrand
This publication has 19 references indexed in Scilit:
- Analytical modeling of micro-milling operations on biocompatible Ti6Al4V titanium alloyProcedia CIRP, 2022
- Applied tutorial for the design and fabrication of biomicrofluidic devices by resin 3D printingAnalytica Chimica Acta, 2022
- Time-efficient fabrication method for 3D-printed microfluidic devicesScientific Reports, 2022
- Microfluidic devices manufacturing with a stereolithographic printer for biological applicationsMaterials Science and Engineering: C, 2021
- Accurate and rapid 3D printing of microfluidic devices using wavelength selection on a DLP printerLab on a Chip, 2020
- Transcribing In Vivo Blood Vessel Networks into In Vitro Perfusable Microfluidic DevicesAdvanced Materials Technologies, 2020
- Fabrication of truly 3D microfluidic channel using 3D-printed soluble moldBiomicrofluidics, 2018
- Assessment of the biocompatibility of three-dimensional-printed polymers using multispecies toxicity testsBiomicrofluidics, 2015
- Cost-Effective Three-Dimensional Printing of Visibly Transparent Microchips within MinutesAnalytical Chemistry, 2014
- Polymer surface morphology control by reactive ion etching for microfluidic devicesSensors and Actuators B: Chemical, 2008