Effects of Anodizing Conditions on Thermal Properties of Al 20XX Alloys for Aircraft
Open Access
Abstract
Anodizing was applied to improve the heat dissipation performance of aluminum (Al) alloys, by forming an oxide layer, such that they could be employed in aerospace applications. The methods employed were hard sulfuric acid (high hardness), soft sulfuric acid (low hardness), boric-sulfuric mixed acid, tin-sulfuric mixed acid, and chromic acid solutions. Each process was completed under optimized conditions. The surface morphology was observed using field emission scanning electron microscopy (FE-SEM) and a digital camera. For the determination of thermal performance, Fourier transform infrared spectroscopy (FT-IR) was used to measure the emissivity at 50 °C, and laser flash analysis (LFA) was utilized to analyze the thermal diffusivity at room temperature to 300 °C. The radiative property of metals is often ignored because of their low emissivity, however, in this research, the emissivity of the metal oxides was found to be higher than that of bare metal series. This study improved the heat dissipation properties by oxidization of Al via the anodizing process.Keywords
Funding Information
- Ministry of Trade, Industry and Energy (P0004798)
This publication has 26 references indexed in Scilit:
- Experimental Study on the Influence of Machining Conditions on the Quality of Electrical Discharge Machined Surfaces of aluminum alloy Al5052Machines, 2020
- Analysis of the microhardness, mechanical properties and electrical conductivity of 7055 aluminum alloyVacuum, 2020
- Study on the changes of emissivity of basic copper carbonate in the decomposition processInternational Journal of Heat and Mass Transfer, 2019
- Towards Cr(VI)-free anodization of aluminum alloys for aerospace adhesive bonding applications: A reviewFrontiers of Chemical Science and Engineering, 2017
- The improved thermal radiation property of SiC doped microarc oxidation ceramic coating formed on niobium metal for metal thermal protective systemSurface and Coatings Technology, 2017
- Aluminium Alloys for Aerospace Applications2016
- Composite plasma electrolytic oxidation to improve the thermal radiation performance and corrosion resistance on an Al substrateApplied Surface Science, 2015
- Preparation of black high absorbance and high emissivity thermal control coating on Ti alloy by plasma electrolytic oxidationSurface and Coatings Technology, 2014
- Recent developments in advanced aircraft aluminium alloysMaterials & Design (1980-2015), 2014
- Application of modern aluminum alloys to aircraftProgress in Aerospace Sciences, 1996