Effect of thermotropic copolyesteramide on the properties of polyamide‐66/liquid crystalline copolyester composites
- 1 February 2002
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 42 (2) , 452-460
Abstract
Liquid crystalline copolyester‐polyamide 66 (LCPES/PA66) composites compatibilized by liquid crystalline copolyesteramide (LCPEA) were prepared by injection molding. The LCPES employed was a commercial copolyester, Vectra A950, and the LCPES was a semiflexible thermotropic copolyesteramides based on 30 mol% of p‐amino benzoic acid (ABA) and 70 mol% of poly(ethylene terephthalate) (PET). Thermal analysis, mechanical characterization, and morphological investigations were conducted on the blends. The dynamic mechanical analysis (DMA) and differential scanning calorimetry (DSC) tests showed that LCPEA is an effective compatibilizer for the LCPES/PA66 composites. The mechanical measurements showed that the stiffness, tensile strength and Izod impact strength of the in‐situ composites are improved by adding LCPEA because of the compatibilization and reinforcement to LCPES/PA66 composites. However, the properties improvement vanished when LCP content reached 10 wt%. The drop weight dart impact test was also applied to analyze the impact fracture characteristics of these composites. The results showed that the maximum impact force (Fmax), crack initiation and propagation energy all improved with the addition of a small percent of LCPEA. From these results, it appeared that LCPEA prolongs the time for crack initiation and propagation. It also increases the energies for crack initiation and propagation, thereby leading to toughening of the LCPES/PA66 in‐situ composites. Finally, the correlation between the mechanical properties and morphology of the composites is discussed.Keywords
This publication has 19 references indexed in Scilit:
- Compatibilizing effect of styrene-maleic anhydride copolymer on the properties of polyamide-6/liquid crystalline copolyester compositesJournal of Applied Polymer Science, 2000
- Miscibility enhancement of modified polystyrene blends with a liquid crystalline polymerPolymer, 1999
- Impact-modified blends of compatibilized polyamide-6 with liquid crystalline copolyesterJournal of Applied Polymer Science, 1998
- Morphology and mechanical characteristics of compatibilized polyamide 6-liquid crystalline polymer compositesPolymer, 1997
- Reactive compatibilization of the poly(ethylene terephthalate)/liquid crystalline polymer blends by solid epoxy resin as a coupling agentJournal of Applied Polymer Science, 1996
- Compatibilization of blends containing thermotropic liquid crystalline polymers with sulfonate ionomersPolymer, 1996
- Hydrogen Bonding in Blends of Phenoxy Resin and Poly(vinylpyrrolidone)Macromolecules, 1995
- Compatibilization of thermoplastic composites based on blends of polypropylene with two liquid crystalline polymersPolymer, 1995
- Mechanical properties and morphology of polymer blends of poly(ethylene terephthalate) and semiflexible thermotropic liquid crystalline polyestersPolymer Engineering & Science, 1992
- Speculation on interfacial adhesion and mechanical properties of blends of PET and thermotropic polyester with flexible spacer groupsPolymer Engineering & Science, 1990