Influence of the Conditioning Method for Pre-Sintered Zirconia on the Shear Bond Strength of Bilayered Porcelain/Zirconia
Open Access
Abstract
This study evaluated the bond strength of veneering porcelain with an experimental conditioner-coated zirconia. Pre-sintered Y-TZP specimens (n = 44) were divided in two groups based on conditioning type. After sintering, all sample surfaces were sandblasted and layered with veneering porcelain. Additionally, half of the specimens in each group underwent thermal cycling (10,000 cycles, 5–55 °C), and all shear bond strengths were measured. After testing, the failure mode of each fractured specimen was determined. Differences were tested by parametric and Fisher’s exact tests (α = 0.05). The differences in bond strength were not statistically significant. Adhesive fractures were dominantly observed for the non-thermal cycled specimens. After thermal cycling, the conditioner-coated group showed cohesive and mixed fractures (p = 0.0021), whereas the uncoated group showed more adhesive fractures (p = 0.0021). Conditioning of the pre-sintered Y-TZP did not change the shear bond strength of the veneering porcelain, but did improve the failure mode after thermal cycling.Keywords
This publication has 39 references indexed in Scilit:
- Pressed ceramics onto zirconia. Part 1: Comparison of crystalline phases present, adhesion to a zirconia system and flexural strengthDental Materials, 2011
- Improving the resistance to sliding contact damage of zirconia using elastic gradientsJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2010
- Sintering behavior and mechanical properties of zirconia compacts fabricated by uniaxial press formingThe Journal of Advanced Prosthodontics, 2010
- Bio-inspired design of dental multilayers: Experiments and modelJournal of the Mechanical Behavior of Biomedical Materials, 2009
- Graded structures for damage resistant and aesthetic all-ceramic restorationsDental Materials, 2009
- Shear bond strengths between different zirconia cores and veneering ceramics and their susceptibility to thermocyclingDental Materials, 2008
- Microtensile bond strength of different components of core veneered all-ceramic restorationsDental Materials, 2006
- Microstructure and mechanical properties of porous yttria stabilized zirconia ceramic using poly methyl methacrylate powderScripta Materialia, 2006
- What future for zirconia as a biomaterial?Biomaterials, 2006
- Microtensile bond strength of different components of core veneered all-ceramic restorationsDental Materials, 2005