Modulus development in oriented short‐glass‐fiber‐reinforced polymer composites
Authors:
- 1 July 1982
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 3 (3) , 138-145
Abstract
The increase in modulus obtained in a short‐glass‐fiber‐reinforced polymer composite as a result of uniaxial deformation may be related to the observed increase in both fiber and matrix orientation. Quantitative measurements of both fiber and matrix orientation are presented for a series of samples of short‐glass‐fiber‐reinforced polyoxymethylene copolymer, processed to various substantial deformation ratios by solid‐phase hydrostatic extrusion. The polymer matrix becomes highly oriented at modest deformations, but the glass fibers orient in a slower pseudo‐affine manner and dominate the development of modulus in the composite. A simple “law‐of‐mixtures” model is used to demonstrate that perfect uniaxial orientation of the fibers is not achieved, but a better fit to measured modulus data is obtained by using an “aggregate” model applied to oriented fibers in an oriented matrix. The development of modulus with deformation ratio may be predicted very well if it is assumed that: the composite consists of a series‐coupled array of sub‐units, each containing continuous and fully oriented fibers in a fully oriented matrix; and orientation of the sub‐units develops with deformation in a pseudo‐affine manner.Keywords
This publication has 12 references indexed in Scilit:
- The hydrostatic extrusion and die‐drawing of glass‐fiber‐reinforced polyoxymethylenePolymer Engineering & Science, 1982
- Manufacture of ultrahigh‐modulus poly(oxymethylenes) by die drawingJournal of Applied Polymer Science, 1981
- Hydrostatic extrusion of linear polyethylene: Effects of molecular weight and product diameterJournal of Polymer Science: Polymer Physics Edition, 1978
- Hydrostatic extrusion of polyoxymethyleneJournal of Polymer Science: Polymer Physics Edition, 1978
- An improved model for crystalline orientation of spherulitic polymersJournal of Polymer Science: Polymer Physics Edition, 1974
- Crystal orientation in a semicrystalline polymer in relation to deformation of polymer spherulites. II. Orientation distribution function of crystallites within crystal lamella as a function of lamellar orientationJournal of Polymer Science: Polymer Physics Edition, 1972
- Modulus of short carbon and glass fiber reinforced compositesPolymer Engineering & Science, 1971
- Optical and Mechanical Anisotropy in Crystalline PolymersProceedings of the Physical Society (1958-1967), 1962
- Zum Deformationsmechanismus der Faserstoffe, IColloid and Polymer Science, 1933
- Berechnung der Fließgrenze von Mischkristallen auf Grund der Plastizitätsbedingung für Einkristalle .ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, 1929