Properties of Opaque Resin Composite Containing Coated and Silanized Titanium Dioxide
Authors:
- 1 March 2001
- journal article
- other
- Published by SAGE Publications in Journal of Dental Research
- Vol. 80 (3) , 864-868
Abstract
Titanium dioxide (TiO 2) is mainly used as a pigment in opaque resin composites for application to the surface of a metal framework. The hypothesis in this paper is that particles of silica/alumina (SiO2/Al2O3)-coated Ti02 treated with a silane coupling agent could bond effectively with resin monomers of opaque resin composites. Untreated TiO2 was used as the control filler. Compressive and flexural strength specimens were prepared by the heat-curing method, because these bulk specimens could not be made by the typical photo-curing method. The treated composite had significantly higher compressive and flexural strengths than the untreated composite after 6 months' immersion in water. Scanning electron microscopy of the fractured composite surfaces showed an interface failure between TiO2 and resin for the untreated composite and cohesive failure within the resin for the treated composite after 6 months' immersion. The light-activated opaque resin composite containing treated TiO2 exhibited significantly higher bond strength to a noble dental alloy after 5000 thermal cycles than that containing untreated TiO2. Thus, silanized SiO2/Al 2O3-coated TiO2 appears to be clinically useful as a filler of opaque resin composites.Keywords
This publication has 15 references indexed in Scilit:
- Characterization of inorganic fillers in visible‐light‐cured dental composite resinsJournal of Oral Rehabilitation, 1992
- The relationship between monomer composition and physical properties of light-cured opaque resinDental Materials, 1992
- SEM and elemental analysis of composite resinsThe Journal of Prosthetic Dentistry, 1990
- Monomer Composition and Bond Strength of Light-cured 4-META Opaque ResinJournal of Dental Research, 1990
- Some properties of commercially available light-cured opaque resins.Nihon Hotetsu Shika Gakkai Zasshi, 1990
- Mechanical properties and filler fraction of dental compositesDental Materials, 1989
- Polymerization of visible-light cured veneering resins. Part 2. Influence of fillers and initiator systems.Nihon Hotetsu Shika Gakkai Zasshi, 1988
- Materials Science Effect of Filler Content and Size on Properties of CompositesJournal of Dental Research, 1985
- Influence of Silane Treatment and Filler Fraction on Thermal Expansion of Composite ResinsJournal of Dental Research, 1984
- Effects of water on glass-filled methacrylate resinsJournal of Materials Science, 1983