Modelling Formation Damage Caused by Kaolinite from 25 to 300°C in the Oil Sand Reservoirs of Alberta

Authors:

Abstract
SUMMARY: The oil sands of Alberta contain some of the largest deposits of bitumen in the world. In the majority of these oil sands reservoirs, the most abundant clay mineral present is kaolinite. Kaolinite has two different types of formation damage, both leading to permeability changes. At low temperatures, kaolinite contributes to fines transport; at the high temperatures accompanying steam recovery, kaolinite reacts with other minerals and condensed steam to form smectite or analcime. Transport of kaolinite fines in the reservoir at low temperatures is dependent on both hydrodynamic and colloidal forces. Mobilization of kaolinite fines depends on the water chemistry and is favored by high pH and low salt concentration. The dependence of kaolinite mobilization on solution chemistry is modelled using surface group ionization and DLVO theory and related to produced water compositions from oil sands reservoirs. Water-mineral reactions in oil sands reservoirs are modelled at high temperatures; and are shown to be controlled by the quality and water chemistry of the injected steam. The residual liquid phase of the injected steam can attain pH's of 12 (25°C equivalent) in the steam generator. When such a residual liquid phase contacts the oil sand reservoir, it destabilizes the 'acid' clay, kaolinite and favors the formation of zeolite over smectite.
Keywords

This publication has 34 references indexed in Scilit: