A model to simulate special concentrically braced frames beyond brace fracture
Authors:
- 11 May 2012
- journal article
- research article
- Published by Wiley in Earthquake Engineering & Structural Dynamics
- Vol. 42 (2) , 183-200
Abstract
SUMMARY: Special concentrically braced frames (SCBFs) are commonly used as the lateral‐load resisting system in buildings. SCBFs primarily sustain large deformation demands through inelastic action in the brace, including compression buckling and tension yielding; secondary yielding may occur in the gusset plate and framing elements. The preferred failure mode is brace fracture. Yielding, buckling, and fracture behavior results in highly nonlinear behavior and accurate analytical modeling of these frames is required. Prior research has shown that continuum models are capable of this level of simulation. However, those models are not suitable for structural engineering practice. To enable the use of accurate yet practical nonlinear models, a research study was undertaken to investigate modeling parameters for line‐element models, which is a more practical modeling approach. This portion of the study focused on methods to predict brace fracture. A fracture modeling approach simulated the nonlinear, cyclic response of SCBFs by correlating onset of fracture to the maximum strain range in the brace. The model accounts for important brace design parameters including slenderness, compactness, and yield strength. Fracture data from over 40 tests was used to calibrate the model and included single‐brace component, single story frame, and full‐scale multistory frame specimens. The proposed fracture model is more accurate and simpler than other, previously proposed models. As a result, the proposed model is an ideal candidate for practical performance simulation of SCBFs. Copyright © 2012 John Wiley & Sons, Ltd.Keywords
This publication has 11 references indexed in Scilit:
- Improved analytical model for special concentrically braced framesJournal of Constructional Steel Research, 2012
- A balanced design procedure for special concentrically braced frame connectionsJournal of Constructional Steel Research, 2011
- Experimental Investigation of Inelastic Cyclic Buckling and Fracture of Steel BracesJournal of Structural Engineering, 2009
- Improved Seismic Design of Concentrically Braced Frames and Gusset Plate Connections2008
- Analytical Performance Simulation of Special Concentrically Braced FramesJournal of Structural Engineering, 2008
- Model for Cyclic Inelastic Buckling of Steel BracesJournal of Structural Engineering, 2008
- Seismic Behavior of HSS Bracing Members according to Width–Thickness Ratio under Symmetric Cyclic LoadingJournal of Structural Engineering, 2007
- Experimental Behaviour of Hollow and Filled RHS Bracing Members Under Earthquake Loading2006
- Seismic Response of Concentrically Braced Steel Frames Made with Rectangular Hollow Bracing MembersJournal of Structural Engineering, 2003
- Inelastic Response of Restrained Steel TubesJournal of the Structural Division, 1978