A new wide-band planar balun on a single-layer PCB
Authors:
- Yong-Xin GuoYGYong-Xin Guo
- Ling Chuen OngLOLing Chuen Ong
- M.Y.W. ChiaMCM.Y.W. Chia
- 31 May 2005
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Components Letters
- Vol. 15 (6) , 416-418
Abstract
A new wide-band microstrip balun implemented on a single-layer printed circuit board (PCB) is presented in this letter. The proposed planar balun consists of a wide-band Wilkinson power divider and a noncoupled-line broad-band 180/spl deg/ phase shifter. To demonstrate the design methodology, one prototype is realized. The new design was simulated and validated by the measurement. Measured results show that 10-dB return loss of the unbalanced port has been achieved across the bandwidth from 1.7 GHz to 3.3 GHz, or 64%. Within the operation band, the measured return losses for both the two balanced ports are better than -10 dB, and the balanced ports isolation is below -1.5 dB. The measured amplitude and phase imbalance between the two balanced ports are within 0.3 dB and /spl plusmn/5/spl deg/, respectively, over the operating frequency band.Keywords
This publication has 10 references indexed in Scilit:
- A 4.5 to 18 GHz Phase Shifter2005
- Improved planar Marchand balun using a patterned ground planeInternational Journal of RF and Microwave Computer-Aided Engineering, 2005
- A 2-18 GHz 180 degree phase splitter network2003
- A new compact wideband balun2002
- A 6 to 20 GHz planar balun using a Wilkinson divider and Lange couplers2002
- A monolithic or hybrid broadband compensated balun2002
- Wideband, planar, log-periodic balun2002
- Analysis and design of impedance-transforming planar Marchand balunsIEEE Transactions on Microwave Theory and Techniques, 2001
- A new design procedure for single-layer and two-layer three-line balunsIEEE Transactions on Microwave Theory and Techniques, 1998
- An N-Way Hybrid Power DividerIEEE Transactions on Microwave Theory and Techniques, 1960