Thermoplastic silicone elastomer lubricant in extrusion of polypropylene wood flour composites
- 1 June 2007
- journal article
- research article
- Published by Wiley in Advances in Polymer Technology
- Vol. 26 (2) , 100-108
Abstract
A possibility of using a thermoplastic silicone elastomer (TPSE) for reduction of surface defects in the extrusion of wood‐filled metallocene polypropylene (mPP) has been investigated in this work. A capillary rheometer and a single‐screw extruder have been utilized to study the effect of the additive on the extrudate distortions. Maleated syndiotactic metallocene polypropylene was also used as an adhesion promoter in mPP/wood flour composites. At loadings of 50 wt% wood flour in the mPP, the extrudates come out of the die with significant tearing and surface roughness. The surface rupture mechanism is similar to that of sharkskin in neat polymers; however, the defect is much more exaggerated in the case of wood fiber‐filled composites. It was found that TPSE at low concentrations (1 wt%) was able to reduce or even completely eliminate extrudate surface tearing. Increasing the extrusion speed yielded better results. Addition of a coupling agent also provides improvement in the extrudate appearance. © 2007 Wiley Periodicals, Inc. Adv Polym Techn 26:100–108, 2007; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/adv.20090Keywords
This publication has 28 references indexed in Scilit:
- Properties of lignocellulosic material filled polypropylene bio-composites made with different manufacturing processesPolymer Testing, 2006
- On-line monitoring of the residence time distribution along a kneading block of a twin-screw extruderPolymer Testing, 2004
- Effect of mape on the mechanical properties of rubber wood fiber/thermoplastic natural rubber compositesAdvances in Polymer Technology, 2004
- Sharkskin and cracking of polymer melt extrudatesJournal of Non-Newtonian Fluid Mechanics, 1997
- A process for coupling wood to thermoplastic using graft copolymersAdvances in Polymer Technology, 1995
- The rheology, fiber orientation, and processing behavior of fiber‐filled fluidsJournal of Rheology, 1992
- Prehydrolyzed Cellulose as Reinforcing Filler for ThermoplasticsInternational Journal of Polymeric Materials and Polymeric Biomaterials, 1987
- Rheological and extrusion characteristics of glass fiber‐reinforced polycarbonateJournal of Applied Polymer Science, 1981
- Order‐disorder transitions in the extrusion of fiber‐filled poly (ethylene terephthalate) and blendsPolymer Engineering & Science, 1979
- Explicit Formulas for Slip and FluidityJournal of Rheology, 1931