Determination of the Clean Air Delivery Rate (CADR) of Photocatalytic Oxidation (PCO) Purifiers for Indoor Air Pollutants Using a Closed-Loop Reactor. Part II: Experimental Results
Open Access
Abstract
The performances of a laboratory PhotoCatalytic Oxidation (PCO) device were determined using a recirculation closed-loop pilot reactor. The closed-loop system was modeled by associating equations related to two ideal reactors: a perfectly mixed reservoir with a volume of VR = 0.42 m3 and a plug flow system corresponding to the PCO device with a volume of VP = 5.6 × 10−3 m3. The PCO device was composed of a pleated photocatalytic filter (1100 cm2) and two 18-W UVA fluorescent tubes. The Clean Air Delivery Rate (CADR) of the apparatus was measured under different operating conditions. The influence of three operating parameters was investigated: (i) light irradiance I from 0.10 to 2.0 mW·cm−2; (ii) air velocity v from 0.2 to 1.9 m·s−1; and (iii) initial toluene concentration C0 (200, 600, 1000 and 4700 ppbv). The results showed that the conditions needed to apply a first-order decay model to the experimental data (described in Part I) were fulfilled. The CADR values, ranging from 0.35 to 3.95 m3·h−1, were mainly dependent on the light irradiance intensity. A square root influence of the light irradiance was observed. Although the CADR of the PCO device inserted in the closed-loop reactor did not theoretically depend on the flow rate (see Part I), the experimental results did not enable the confirmation of this prediction. The initial concentration was also a parameter influencing the CADR, as well as the toluene degradation rate. The maximum degradation rate rmax ranged from 342 to 4894 ppbv/h. Finally, this study evidenced that a recirculation closed-loop pilot could be used to develop a reliable standard test method to assess the effectiveness of PCO devices.Keywords
This publication has 16 references indexed in Scilit:
- How chemical and physical mechanisms enable the influence of the operating conditions in a photocatalytic indoor air treatment device to be modeledChemical Engineering Journal, 2017
- Photocatalytic air cleaners and materials technologies – Abilities and limitationsBuilding and Environment, 2015
- Efficiency and harmfulness of air-purifying photocatalytic commercial devices: From standardized chamber tests to nanoparticles releaseCatalysis Today, 2015
- Key parameters influencing the performance of photocatalytic oxidation (PCO) air purification under realistic indoor conditionsApplied Catalysis B: Environment and Energy, 2012
- Overview of the current ISO tests for photocatalytic materialsJournal of Photochemistry and Photobiology A: Chemistry, 2012
- Can commonly-used fan-driven air cleaning technologies improve indoor air quality? A literature reviewAtmospheric Environment, 2011
- Some views about indoor air photocatalytic treatment using TiO2: Conceptualization of humidity effects, active oxygen species, problem of C1–C3 carbonyl pollutantsApplied Catalysis B: Environment and Energy, 2010
- Photocatalytic purification of volatile organic compounds in indoor air: A literature reviewAtmospheric Environment, 2009
- Photooxidation of Sub-Parts-per-Million Toluene and Formaldehyde Levels on Titania Using a Glass-Plate ReactorEnvironmental Science & Technology, 1996
- The modelling of concentration—time relationships in recirculating electrochemical reactor systemsElectrochimica Acta, 1977