Investigation of wave reflection at the joint with different wave impedances on two sides
Authors:
- 28 January 2021
- journal article
- research article
- Published by Taylor & Francis in Waves in Random and Complex Media
- Vol. 33 (2) , 237-253
Abstract
When the stress wave propagates through rock mass with different wave impedances on two sides. It shows different reflection tendencies compared with the traditional study of wave propagation. A characteristic line method combined with the displacement discontinuity model was proposed to study the wave reflection through such rock mass. The effects of incident frequency, joint stiffness and wave impedance ratio on the reflection coefficient were discussed. The results show that the reflection coefficient increases as the wave impedance ratio increases. The traditional study of wave reflection can be regarded as a special case of the present study when the wave impedance ratio equals 1.0. Moreover, the difference of reflection coefficients decreases as the incident frequency increases, while increases as the joint stiffness and wave impedance ratio increase when the wave impedance ratio is larger than 1.0. When the wave impedance ratio is smaller than 1.0, the difference of reflection coefficients increases firstly and then decreases with the increase of incident frequency and joint stiffness, while decreases as the wave impedance ratio increases. For the cases of large incident frequency or small joint stiffness, the effects of wave impedance ratio can be neglected for the approximated prediction of wave reflection.Keywords
Funding Information
- National Natural Science Foundation of China (51778021)
This publication has 23 references indexed in Scilit:
- Effects of a set of parallel joints with unequal close-open behavior on stress wave energy attenuationWaves in Random and Complex Media, 2020
- Study of the cylindrical wave propagation across a single rock joint with nonlinear normal deformationWaves in Random and Complex Media, 2019
- Modelling of crack propagation in rocks under SHPB impacts using a damage methodFatigue & Fracture of Engineering Materials & Structures, 2019
- Stress Wave Propagation Across a Rock Mass with Two Non-parallel JointsRock Mechanics and Rock Engineering, 2016
- A time-domain recursive method to analyse transient wave propagation across rock jointsGeophysical Journal International, 2011
- Numerical simulation of tensile damage and blast crater in brittle rock due to underground explosionInternational Journal of Rock Mechanics and Mining Sciences, 2007
- P-wave transmission across fractures with nonlinear deformational behaviourInternational Journal for Numerical and Analytical Methods in Geomechanics, 2006
- The spalling of long bars as a reliable method of measuring the dynamic tensile strength of ceramicsInternational Journal of Impact Engineering, 2002
- An experimental method for dynamic tensile testing of concrete by spallingInternational Journal of Impact Engineering, 2001
- Effects of multiple parallel fractures on apparent attenuation of stress waves in rock massesInternational Journal of Rock Mechanics and Mining Sciences, 2000