An Ultra-Wideband Multilayer Absorber Using an Equivalent Circuit-Based Approach
- 19 October 2022
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 70 (12) , 11911-11921
Abstract
An ultra-wideband (UWB) absorber designed by equivalent circuit model (ECM) is presented in the paper. The structural parameters of multi-layer absorbers were calculated for full-wave simulation so as to verify the accuracy of this method. The simulation results illustrated that the ideal frequency response can be easily and quickly obtained by using ECM, such as single narrow absorption band, dual-band absorption peak and ultra-wide absorption band. A 20 × 20 quadruple-layer absorber was fabricated and tested, which obtained 10-dB radar cross section reduction (RCSR) from 2.1 GHz to 37.5 GHz with bandwidth ratio (BWR) of 17.62:1. The overall dimensions of the unit cell structure is 280×280×14 mm3 (1.96 λmax × 1.96 λmax × 0.098 λmax), and the absorber exhibits stable response on conformal cylinders with central angles of 30° and 60°. Moreover, in order to reduce the influence of high-order modes above U-band, the space mapping (SM) technique was introduced to optimize the absorber’s parameters, which greatly expanded the high frequency absorption bandwidth. A 10-dB RCSR was achieved from 3 GHz to 94 GHz with BWR of 31.33:1.Keywords
Funding Information
- National Natural Science Foundation of China (62001228, 62271256, 61890541, 61931021)
- State Key Laboratory of Millimeter Wave (K202213)
- Fundamental Research Funds for the Central Universities (30922010703)
- National Key Laboratory Foundation of China (6142411203108)
This publication has 33 references indexed in Scilit:
- Space mapping optimisation of 2D array elements arrangement to reduce the radar cross‐scatteringIET Microwaves, Antennas & Propagation, 2017
- Broadband metamaterial for optical transparency and microwave absorptionApplied Physics Letters, 2017
- A Fast and Efficient Design Method for Circuit Analog Absorbers Consisting of Resistive Square-Loop ArraysIEEE Transactions on Electromagnetic Compatibility, 2016
- On the Design of Single-Layer Circuit Analog Absorber Using Double-Square-Loop ArrayIEEE Transactions on Antennas and Propagation, 2013
- Development of Optically Transparent Ultrathin Microwave Absorber for Ultrahigh-Frequency RF Identification SystemIEEE Transactions on Microwave Theory and Techniques, 2012
- Ultimate thickness to bandwidth ratio of radar absorbersIEEE Transactions on Antennas and Propagation, 2000
- Radar Cross Section Measurements1993
- Reflection properties of the Salisbury screenIEEE Transactions on Antennas and Propagation, 1988
- Equivalent-circuit models for frequency-selective surfaces at oblique angles of incidenceIEE Proceedings H Microwaves, Antennas and Propagation, 1985
- Equivalent circuit model for arrays of square loopsElectronics Letters, 1982