Tensile and Flexural Properties of Bamboo (Gigantochloa apus) Fiber/Epoxy Green Composites
Authors:
- 1 April 2015
- journal article
- Published by Trans Tech Publications, Ltd. in Applied Mechanics and Materials
- Vol. 758, 119-123
Abstract
The current work deals with the tensile and flexural properties of bamboo fiber/epoxy composites. Tensile and flexural property evaluations were carried out in accordance with the ASTM D638 and ASTM D790 standards, respectively. Bamboo fiber was obtained from local bamboo by means of degumming process. The matrix being used is Eposchon general purpose Bisphenol A-epichlorohydrin epoxy resin mixed with Eposchon general purpose Polyaminoamide epoxy hardener supplied by P.T. Justus Kimiaraya. The specimens were cut from five bamboo fiber/epoxy composite panels. Five different fiber volume fractions, Vf, i.e. 0, 10, 20, 30 and 40 vol%, have been considered. All mechanical and physical characterization were carried out at the Mechanical Engineering laboratory, Universitas Muhammaiyah Yogyakarta. Photo macrographs of selected samples were analyzed to describe their failure modes. Physical property evaluation revealed that a slight fiber content deviation from their expected results was observed. Whilst tensile strength, modulus and strain to failure, as well as flexural strength and modulus were found to increase with the increase of fiber content up to 29.8%, maximum flexural strain to failure was being at Vf = 21.1%. Tensile specimens were mostly failed by debonding followed by fiber breakage, while flexural specimens were mostly failed by debonding followed by fiber breakage and fiber pull-out at tension sides.Keywords
This publication has 7 references indexed in Scilit:
- Resistance of Natural Bamboo Fiber to Microorganisms and Factors that May Affect Such ResistanceBioResources, 2013
- Influence of fiber extraction and surface modification on mechanical properties of green composites with bamboo fiberJournal of Adhesion Science and Technology, 2013
- Flexural Properties of Wheat Straw Reinforced Polyester CompositesAmerican Journal of Materials Science, 2011
- Properties of oriented strand board made from Betung bamboo (Dendrocalamus asper (Schultes.f) Backer ex Heyne)Wood Science and Technology, 2010
- Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending2010
- Extraction and tensile properties of natural fibers: Vakka, date and bambooComposite Structures, 2007
- Compressive splitting response of glass-fiber reinforced unidirectional compositesComposites Science and Technology, 2000