Influences of Fiber Volume Content on the Mechanical Properties of 2D Plain Carbon-Fiber Woven Composite Materials
Open Access
Abstract
The influence of fiber volume content on the mechanical properties of two-dimensional (2D) plain carbon-fiber woven composites is a crucial concern that necessitates immediate attention for large-scale applications in wind turbine blades. In this study, various mechanical tests were conducted on 2D plain carbon-fiber woven composites with different fiber volume contents, and the influences of fiber volume content on the mechanical properties and failure mode of the composite material were analyzed. Using carbon fiber as reinforcement and epoxy resin as a matrix, three types of plates with fiber volume contents of 47%, 50% and 53% were fabricated by using autoclave technology. The tensile, compression and interlaminar shear tests of the two-dimensional woven composites were carried out using MTS series testing machines. The influences of fiber volume content on tensile strength and modulus, compressive strength and modulus, interlaminar shear strength and shear strain energy were investigated. Additionally, the progressive damage development of these two-dimensional woven composites under different stress states was studied using scanning electron microscopy (SEM). The results indicate that the tensile strength and compressive strength increase almost linearly with the increase in fiber volume content, while the interlaminar shear strength increases slowly at low fiber volume content and rapidly at high fiber volume content. The tensile modulus of elasticity slightly increases as the fiber volume content increases, whereas the compressive modulus remains stable at low fiber volume content but gradually decreases at high fiber volume content. With the increase in fiber volume content, the shear strain energy of the specimen increases significantly.Keywords
Funding Information
- National Natural Science Foundation of China (52178491, 51905350, JCYJ20210324093809023)
- Natural Science Foundation of Shenzhen Municipality (52178491, 51905350, JCYJ20210324093809023)
This publication has 28 references indexed in Scilit:
- Materials for Wind Turbine Blades: An OverviewMaterials, 2017
- Wind Turbine Accidents: A Data Mining StudyIEEE Systems Journal, 2016
- Aeroservoelastic design definition of a 20 MW common research wind turbine modelWind Energy, 2016
- Impact properties of 2D and 3D woven composites : A reviewAIP Conference Proceedings, 2016
- A comparative study of twill weave reinforced composites under tension–tension fatigue loading: Experiments and meso-modellingComposite Structures, 2016
- The Strain Evaluation of the Notch tip Area for the CFRP/GFRP Hybrid Laminate Plate using the SENT SpecimenJournal of the Korean Society of Safety, 2014
- Experimental Investigation of the Strain Rate Dependent Behaviour of 2D Biaxially and Triaxially Reinforced Braided CompositesApplied Composite Materials, 2013
- Monotonic and cyclic short beam shear response of 3D woven compositesComposites Science and Technology, 2010
- Interlaminar shear strength of glass fiber reinforced epoxy composites enhanced with multi-walled carbon nanotubesComposites Part A: Applied Science and Manufacturing, 2008
- The Static and Dynamic Mechanical Properties of Banana and Glass Fiber Woven Fabric-Reinforced Polyester CompositeJournal of Composite Materials, 2005