Constructing Interfacial Nanolayer Stabilizes 4.3 V High‐Voltage All‐Solid‐State Lithium Batteries with PEO‐Based Solid‐State Electrolyte
Authors:
- 1 March 2022
- journal article
- research article
- Published by Wiley in Advanced Functional Materials
- Vol. 32 (23)
Abstract
The complicated interfacial problems of poly(ethylene oxide) (PEO)‐based solid polymer electrolytes (SPEs) at high voltages severely hinder its practical applications for high‐energy‐density all‐solid‐state lithium batteries (ASSLBs). Herein, the failure mechanisms of ASSLBs with LiNi0.6Co0.2Mn0.2O2 (NCM)‐PEO are studied. It is found that the ASSLBs after charge generates a sharp drop of 0.62 V at the cut‐off voltage of 4.30 V, and induce a high interfacial resistance due to forming an uneven thick cathode electrolyte interface on the NCM surface, as well as cause the destruction of NCM surface structure during storage, leading to serious performance degradation. Constructing the interfacial nanolayer with aromatic polyamide (APA) on the surface of NCM active particles (NCM@APA) can mitigate interfacial side reactions between NCM and SPE. Robust interfacial nanolayers not only effectively protect the crystal structure of NCM but also provide a steady interfacial environment for Li+ diffusion kinetics. Accordingly, NCM@APA||SPE||Li ASSLBs exhibit an acceptable voltage drop of 0.27 V after 10 days storage and a substantially improved electrochemical performance with an average coulombic efficiency of 99.1% and capacity retention of 76.7% at 30 mA g−1 after 80 cycles.Keywords
Funding Information
- National Natural Science Foundation of China (22075063, U1932205, 51773049)
- Fundamental Research Funds for the Central Universities (HIT.OCEF.2021028)
- Canadian Light Source
- National Research Council
- Canadian Institutes of Health Research
- University of Saskatchewan
This publication has 57 references indexed in Scilit:
- Least Squares Galvanostatic Intermittent Titration Technique (LS-GITT) for Accurate Solid Phase Diffusivity MeasurementJournal of the Electrochemical Society, 2013
- Factors affecting cyclic durability of all-solid-state lithium polymer batteries using poly(ethylene oxide)-based solid polymer electrolytesEnergy & Environmental Science, 2010
- Comparative study of LiCoO2 surface modified with different oxidesJournal of Power Sources, 2007
- Improvement in High-Voltage Performance of All-Solid-State Lithium Polymer Secondary Batteries by Mixing Inorganic Electrolyte with Cathode MaterialsJournal of the Electrochemical Society, 2006
- Electrochemical and In Situ Synchrotron XRD Studies on Al[sub 2]O[sub 3]-Coated LiCoO[sub 2] Cathode MaterialJournal of the Electrochemical Society, 2004
- Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis setPhysical Review B, 1996
- Projector augmented-wave methodPhysical Review B, 1994
- New electrolyte compositions stable over the 0 to 5 V voltage range and compatible with the Li1+xMn2O4/carbon Li-ion cellsSolid State Ionics, 1994
- Ab initiomolecular-dynamics simulation of the liquid-metal–amorphous-semiconductor transition in germaniumPhysical Review B, 1994
- Determination of the Kinetic Parameters of Mixed‐Conducting Electrodes and Application to the System Li3SbJournal of the Electrochemical Society, 1977