Characterization Study of some Bauxite Deposits in Northern Brazil
Authors:
- 1 December 2023
- journal article
- review article
- Published by Cambridge University Press (CUP) in Clays and Clay Minerals
- Vol. 71 (6) , 707-721
Abstract
Alumina is produced from bauxite, which contains a mixture of various oxides, such as aluminum (Al), iron (Fe), silicon (Si), and titanium (Ti). Bauxite can also be considered a source of several other valuable metals, such as scandium (Sc), vanadium (V), and gallium (Ga). The composition and mineralogy of alumina determine their economic value, but their characteristics vary by locality. The physicochemical characteristics of bauxites can also be influenced largely by weathering processes, even within the same locality. For this reason, the present study was undertaken with the objective of comparing the characterization data of three bauxite samples collected, which will be referred to as D, E, and F, from the Cruz Alta do Pará plateau in northern Brazil. The samples were solubilized by multi-acid digestion and fusion with lithium metaborate to quantify their metal compositions by inductively coupled plasma optical emission spectrometry (ICP-OES). The mineralogical characterization was conducted by X-ray diffraction (XRD), and the phase changes of minerals in bauxite were detected by thermogravimetric analysis (TGA/DTG). The total organic carbon (TOC) technique was used to quantify the C in the samples, and the moisture content was also measured. Alumina was 30 wt.% on average for all samples, good for producing high-purity alumina by hydrometallurgical processes. The results, however, showed high (~20 at.%) silica concentrations in two samples and ~3 wt.% Fe in one sample, which can pose a challenge in the Bayer process. The X-ray diffraction (XRD) analysis showed that gibbsite (Gbs), kaolinite (Kln), anatase (Ant), and hematite (Hem) were the major mineral phases in these samples. The study showed that the samples from the same mine vary in their metal content, especially with regard to Si, and they, thus, need to be processed selectively to maximize their economic value.Keywords
This publication has 60 references indexed in Scilit:
- Aluminum Production2014
- Organic compounds in the processing of lateritic bauxites to alumina Part 2: Effects of organics in the Bayer processHydrometallurgy, 2012
- X-ray Diffraction and Thermal Analysis of Bauxite Ore-Processing Waste (Red Mud) Exchanged with Arsenate and PhosphateClays and Clay Minerals, 2011
- Organic compounds in the processing of lateritic bauxites to aluminaHydrometallurgy, 2010
- Periodical attenuation of Al(OH)3 particles from seed precipitation in seeded sodium aluminate solutionTransactions of Nonferrous Metals Society of China, 2010
- XRD, FTIR, and thermal analysis of bauxite ore-processing waste (red mud) exchanged with heavy metalsClays and Clay Minerals, 2008
- Crushing and fragmentation of brittle spheres under double impact testPowder Technology, 2004
- Nordstrandite in Bauxite Derived from Phonolite, Lages, Santa Catarina, BrazilClays and Clay Minerals, 2001
- Control of Silica in the Bayer Process Used for Alumina ProductionCanadian Metallurgical Quarterly, 1986
- Proceedings, 4th International Congress for the Study of Bauxites, Alumina and Aluminum. Vol. 1, Bauxites; Vol. 2, Bauxites; Vol. 3, Alumina and Aluminum, Soft cover, 1517 pp., $10.00/volume, advanced payment required. Available from Prof. Dr. S. S. Augustithis, National Technical University, Department of Mineralogy-Petrulogy-Geology, 42, October 28th Street, P.O. Box 1482, Athens, Greece.Clays and Clay Minerals, 1980