Electrochemically-assisted ammonia recovery from wastewater using a floating electrode
- 31 January 2017
- journal article
- research article
- Published by IWA Publishing in Water Science & Technology
- Vol. 75 (8) , 1804-1811
Abstract
This work presents and explores a novel methodology for the removal and recovery of ammonia from wastewater based upon two mechanisms: electrochemical oxidation and a previously unreported electrochemically-assisted surface transfer mechanism. Recovery of ammonia is enabled by placing a porous cathodic electrode at the wastewater-air interface. In this configuration, the cathode creates local alkalinity and an electric field that draws ammonium ions towards the wastewater-air interface, resulting in near-linear reductions of dissolved ammonium irrespective of concentration. This approach leads to significant ammonia recovery without the need for ion-exchange membranes. In addition, anodic reactions that simultaneously occur at depth in the wastewater induce ammonia oxidation in accordance with proven mechanisms. The floating electrode approach offers improved ammonia removal efficiency in comparison to electrooxidation. Trials conducted on synthetic wastewater (900 mg NH4+-N l−1) and filtered anaerobic centrate (560 mg NH4+-N l−1) demonstrated ammonia concentration decreases up to 216 mg l−1 hr−1 and 110 mg l−1 hr−1, respectively, under the application of 5 mA cm−2 current density. The technology would be best used to treat municipal and industrial wastewaters possessing high ammonia concentration, including anaerobic digester centrate and urine, and offers potential to assist in removing ammonia from environmental waters.Keywords
This publication has 19 references indexed in Scilit:
- Mechanism of electrochemical oxidation of ammoniaElectrochimica Acta, 2011
- Optimization of electrochemical ammonia removal using Box–Behnken designJournal of Electroanalytical Chemistry, 2011
- Effects of electric voltage and sodium chloride level on electrolysis of swine wastewaterJournal of Hazardous Materials, 2010
- Electrochemical behavior of ammonia at Ni/Ni(OH)2 electrodeElectrochemistry Communications, 2010
- Contributions of electrochemical oxidation to waste‐water treatment: fundamentals and review of applicationsJournal of Chemical Technology & Biotechnology, 2009
- Ammonia removal in electrochemical oxidation: Mechanism and pseudo-kineticsJournal of Hazardous Materials, 2009
- Electrochemical conversion characteristics of ammonia to nitrogenWater Research, 2006
- Influence of operating conditions on the ammonia electro-oxidation rate in wastewaters from power plants (ELONITA™ technique)Water Research, 2005
- The Electrochemical Characteristics of Bulk‐Synthesized Al2CuMgJournal of the Electrochemical Society, 1999
- Ammonia-nitrogen removal by breakpoint chlorinationEnvironmental Science & Technology, 1972