Auger electron spectroscopy and sputter etching of Ni/Au–Ge on n-GaAs
Authors:
- 15 November 1972
- journal article
- research article
- Published by AIP Publishing in Applied Physics Letters
- Vol. 21 (10) , 507-510
Abstract
A new diagnostic technique was used to examine the alloying behavior of the Ni/Au–Ge Ohmic contact to n‐type GaAs. By combining Auger electron spectroscopy with sputter etching, depth‐composition profiles of Ni, Au, Ge, Ga, and As were obtained for alloyed and unalloyed samples. Gallium out‐diffusion and surface accumulation during alloying was observed. The degree of Ga out‐diffusion as well as the redistribution of Ga and As in the alloyed region was found to depend on the orientation of the GaAs substrate. It was shown that the overlaying Ni film does not cover the Au–Ge uniformly during alloying.Keywords
This publication has 9 references indexed in Scilit:
- Auger Electron Spectroscopy Studies of Sputter Deposition and Sputter Removal of Mo from Various Metal SurfacesJournal of Applied Physics, 1972
- Specific contact resistance of ohmic contacts to gallium arsenideSolid-State Electronics, 1972
- Use of Auger Electron Spectroscopy and Inert Gas Sputtering for Obtaining Chemical ProfilesJournal of Vacuum Science and Technology, 1972
- Alloying Behavior of Au and Au–Ge on GaAsJournal of Applied Physics, 1971
- Auger electron spectroscopySurface Science, 1971
- OUTDIFFUSION THROUGH SILICON OXIDE AND SILICON NITRIDE LAYERS ON GALLIUM ARSENIDEApplied Physics Letters, 1970
- Ohmic Contacts to Solution-Grown Gallium ArsenideJournal of Applied Physics, 1969
- Metal-semiconductor contacts for GaAs bulk effect devicesSolid-State Electronics, 1967
- Sputtering Yields of Metals for Ar+ and Ne+ Ions with Energies from 50 to 600 evJournal of Applied Physics, 1961