Molecular structure of interfaces formed with plasma-polymerized silica-like primer films: Part III. Mechanical strength and environmental durability of the primer/aluminum and primer/titanium interfaces
Authors:
- 1 June 2002
- journal article
- research article
- Published by Taylor & Francis in The Journal of Adhesion
- Vol. 78 (6) , 495-504
Abstract
In order to characterize the properties of film/metal interfaces formed between plasma-polymerized amorphous silica-like (a-SiO 2 ) films and metal substrates, lap joints and wedge test specimens were made from aluminum and titanium adherends that were pretreated with plasma-polymerized a-SiO 2 primer films. High breaking strengths of all the lap joints due to cohesive failures within the adhesive indicated that the adhesive/a-SiO 2 and a-SiO 2 /metal interfaces were very strong. In addition, since failure was cohesive within the adhesive, the different interfacial structures at the a-SiO 2 /aluminum and a-SiO 2 /titanium interfaces were cohesively strong. In order to maximize the environmental stress placed upon the a-SiO 2 /metal interfaces, the a-SiO 2 primer films on the metal adherends were pretreated with silane primers before adhesive bonding. This ensured that differences in environmental durability at the a-SiO 2 /metal interface, if any, would be observed. However, no interfacial failures of pretreated substrates was observed, indicating that the a-SiO 2 /aluminum and a-SiO 2 /titanium interfaces had very high environmental durability. This correlated well with the results obtained in Parts I and II of this work, which supported the formation of strong Al-O-Si and Ti-O-Si bonds at the a-SiO 2 /metal interface.Keywords
This publication has 2 references indexed in Scilit:
- Plasma Polymer Films as Adhesion Promoting Primers for Aluminum. Part II: Strength and Durability of Lap JointsThe Journal of Adhesion, 1999
- Review of surface pretreatments for titanium alloysInternational Journal of Adhesion and Adhesives, 1995