Surface mechanical properties of pHEMA contact lenses: Viscoelastic and adhesive property changes on exposure to controlled humidity
- 9 September 2003
- journal article
- research article
- Published by Wiley in Journal of Biomedical Materials Research Part A
- Vol. 67A (1) , 350-356
Abstract
The surface mechanical properties of poly(hydroxyethyl)methacrylate (pHEMA)‐based contact lenses were monitored as a function of humidity by atomic force microscopy (AFM). Surface viscoelastic and adhesion values were extracted from AFM force versus distance interaction curves and were found to be strongly dependent on the bulk water content of the lens and on the relative humidity. At low relative humidity, 40–50%, the dehydration rate from the surface is faster than the hydration rate from the bulk, leading to a rigid surface region that has mechanical properties similar to those measured on totally dehydrated lenses. At relative humidity values > 60%, the dehydration rate from the lens surface rapidly decreases, leading to higher surface water content and a softer surface region. The results indicate that, in an ocular environment, although the bulk of the pHEMA contact lens is hydrated, the surface region may be in a transition between a dehydrated glassy state and a hydrated rubbery state. © 2003 Wiley Periodicals, Inc. J Biomed Mater Res 67A: 350–356, 2003Keywords
This publication has 14 references indexed in Scilit:
- Surface Glass Transition Temperature of Amorphous Polymers. A New Insight with SFMMacromolecules, 2002
- Porous structure of Purevision™ versus Focus® Night&Day™ and conventional hydrogel contact lensesJournal of Biomedical Materials Research, 2002
- Stretched polymer surfaces: Atomic force microscopy measurement of the surface deformation and surface elastic properties of stretched polyethyleneJournal of Polymer Science Part B: Polymer Physics, 2001
- 1H NMR T2 relaxation in contact lens hydrogels as a probe of water mobilityPolymer, 2001
- Kinetics of adhesion on a viscoelastic sample by force microscopyTribology Letters, 2001
- A study of the glass transition of polypropylene surfaces by sum-frequency vibrational spectroscopy and scanning force microscopyChemical Physics, 1999
- Surface wettability enhancement of silicone hydrogel lenses by processing with polar plastic moldsJournal of Biomedical Materials Research, 1997
- Dehydration, lens movement and dryness ratings of hydrogel contact lensesOphthalmic and Physiological Optics, 1995
- Measurement of Thin Film Mechanical Properties Using NanoindentationMRS Bulletin, 1992
- Vapor Pressure and Swelling Pressure of Hydrogels1976