EVALUATION OF INTERFACIAL SHEAR PROPERTIES OF METAL MATRIX COMPOSITES FROM FIBRE PUSH-OUT TESTS
Authors:
- 1 December 1995
- journal article
- research article
- Published by Taylor & Francis in Mechanics of Composite Materials and Structures
- Vol. 2 (4) , 309-328
Abstract
Fibre push-out test is commonly used to characterize the fibre-matrix interfacial behaviour. In the case of metallic and intermetallic matrix composites (MMCs and IMCs), the presence of high levels of thermal residual stresses, very small thickness of the specimens and ductility of the matrix material make the interpretation of the test results difficult. In this paper, single fibre push-out test is studied using finite element methods, with the objective of extracting interfacial properties from the experimental test results. The fibre-matrix interface is modelled using a contact-friction formulation, and debonding of the interface is predicted using a failure criterion based on the local stress state at the interface. Load versus displacement behaviour of the push-out tests is numerically simulated as a function of different interfacial strengths. The data is then used to generate a calibration curve to predict the actual interfacial properties for a given experimentally measured peak push-out load. SiC/Ti-15-3 MMC is used as the model material for the evaluation of interfacial shear properties at different temperatures.Keywords
This publication has 13 references indexed in Scilit:
- Application of GPS Tensors to Fiber Reinforced CompositesJournal of Composite Materials, 1995
- Numerical Modeling of Fiber Push-Out Test in Metallic and Intermetallic Matrix Composites-Mechanics of the Failure ProcessJournal of Composite Materials, 1995
- Inelastic deformation of metal matrix composites: Plasticity and damage mechanismsPhilosophical Magazine A, 1992
- Interfacial stress state present in a “thin-slice” fibre push-out testJournal of Materials Science, 1992
- Radial matrix cracking and interphase failure in transversely loaded fiber compositesMechanics of Materials, 1991
- Micromechanical Modeling of Fiber/Matrix Interface Effects in Transversely Loaded SiC/Ti-6-4 Metal Matrix CompositesJournal of Composites Technology and Research, 1991
- Interfacial properties measurement for SiC fiber-reinforced titantum alloy compositesScripta Metallurgica et Materialia, 1990
- A Continuum Model for Void Nucleation by Inclusion DebondingJournal of Applied Mechanics, 1987
- Damage in composites—Modeling of imperfect bondingComposites Science and Technology, 1987
- Failure Criteria for Unidirectional Fiber CompositesJournal of Applied Mechanics, 1980