Geomechanical aspects of CO2 sequestration in a deep saline reservoir in the Ohio River Valley region
Authors:
- 1 June 2006
- journal article
- Published by American Association of Petroleum Geologists AAPG/Datapages in Environmental Geosciences
- Vol. 13 (2) , 85-103
Abstract
The Ohio River Valley CO2 Storage Project is an ongoing characterization of deep saline formations being considered as potential sites for geological CO2 sequestration. We completed a geomechanical analysis of the Rose Run Sandstone, a potential injection zone, and its adjacent formations at the American Electric Power's 1.3-GW Mountaineer Power Plant in New Haven, West Virginia. The results of this analysis were then applied to three investigations used to evaluate the feasibility of anthropogenic CO2 sequestration in the potential injection zone. First, we incorporated the results of the geomechanical analysis with a geostatistical aquifer model in CO2 injection-flow simulations to test the effects of introducing a hydraulic fracture to increase injectivity. We observed a nearly fourfold increase of injection rate caused by the introduction of a hydraulic fracture in the injection zone. The flow simulations predict that a single vertical well with a hydraulic fracture could inject a maximum of 300–400 kt of CO2/yr. In the second investigation, we determined that horizontal injection wells at the Mountaineer site are feasible because the high rock strength ensures that such wells would be stable in the local stress state. The third investigation used the geomechanical analysis results to evaluate the potential for injection-induced seismicity. If preexisting, but undetected, nearly vertical faults striking north-northeast or east-northeast are present, the increased pore pressure from CO2 injection would raise their reactivation potential. Geomechanical analysis of potential CO2 sequestration sites provides critical information required to evaluate its sequestration potential and associated risks.Keywords
This publication has 21 references indexed in Scilit:
- Assessment of CO2 injection at the mountaineer power plant site using scalable numerical simulation2005
- Determining carbon sequestration injection potential at a site-specific location within the Ohio River Valley region2005
- Determination of stress orientation and magnitude in deep wellsInternational Journal of Rock Mechanics and Mining Sciences, 2003
- Injection‐induced earthquakes and crustal stress at 9 km depth at the KTB deep drilling site, GermanyJournal of Geophysical Research, 1997
- Compressive and tensile failure of inclined well bores and determination of in situ stress and rock strengthJournal of Geophysical Research, 1995
- Utilization of observations of well bore failure to constrain the orientation and magnitude of crustal stresses: Application to continental, Deep Sea Drilling Project, and Ocean Drilling Program boreholesJournal of Geophysical Research, 1990
- Well bore breakouts and in situ stressJournal of Geophysical Research, 1985
- Stress‐induced borehole elongation: A comparison between the four‐arm dipmeter and the borehole televiewer in the Auburn Geothermal WellJournal of Geophysical Research, 1985
- In-situ stress measurement in the Carnmenellis granite—II. Hydrofracture tests at Rosemanowes quarry to depths of 2000 mInternational Journal of Rock Mechanics and Mining Sciences, 1983
- Friction of rocksPure and Applied Geophysics, 1978